How to replace the Front Bumper Cover Brackets 2013-2018 Nissan Altima 🚗

Описание: Find the parts used in the video on CarParts.com just there https://carparts.solutions/ALTIMA
Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS

⚙️ NEEDED CARPARTS AND PRODUCTS
Front bumper cover brackets : https://carparts.solutions/FrontBumpe... and https://carparts.solutions/FrontBumpe...

💪 TIGHTENING TORQUES
No tightening torques for this operation

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Nissan Altima :
https://carparts.solutions/ToolBox

List of the tools we used to replace the front bumper cover brackets on a Nissan Altima :
Hydraulic jack : https://carparts.solutions/FloorJack
Jack stands : https://carparts.solutions/JackStands
Wheel lug wrench
Fork
Multi-bit screwdriver
10mm socket
Ratchet
Phillips screwdriver
Needle-nose pliers
Extender

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your Nissan Altima safely :    • How to jack your Nissan Altima safely ? ⬆ 🚗  

⚠️ CARPARTS.COM'S INFOS
You can order the front bumper cover brackets used in the video on Carparts.com via the link in the description.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:24 Remove the radiator support cover
0:41 Remove the top holding bolts, screws and rivets
1:39 Remove the bottom holding bolts, screws and rivets
2:20 Disconnect the bulbs and cables from the bumper cover
2:42 Disengage the cover from the fender
3:08 Remove the bumper cover
3:29 Remove the bumper cover brackets
3:48 Put the bumper cover brackets back
4:09 Reinstall the bumper cover
4:23 Reinstall the bumper cover in the fenders
4:36 Put the components back in place
5:01 Put the radiator support cover back
5:14 Put the holding bolts, screws and rivets back
5:56 Put your Altima on the ground