Boost converter Using NE555 6V To 60V with feedback - Part-2

Описание: Hi Friends In This video i will make a boost converter using NE555 time ic
-
JLCPCB 1-20 Layer PCB from $2, Flex PCB from $25, Sign up to Get $54 Coupons via https://jlcpcb.com/IAO

PCB Assembly and 3D Printing Offer a Rock-bottom Price too.
-
Gerber File For PCBs
https://drive.google.com/file/d/1RQYh...

Circuit Diagram
-
https://drive.google.com/file/d/1Ye7z...

i made this boost converter in my previous video part -1 . but there was a problem. the voltage was not stable it starts increase until 70-80V so it was problem. and that much high Voltage is not usable for anything. I'm in this part 2 i added feedback. and now its stable and the voltage can be adjusted from 6V to upto 60V . it works amazingly. i used The pin 5 of NE555 timer ic . because the 555 timer ic has internal OpAmp That is connected to oscillator. and pin 5 is connected to Non inverting output of OpAmp . and i used A NPN Transistor to Pull the pin 5 to ground and used a voltage divider to control output voltage. when the voltage increase on feedback the circuit tourn off for neno second or maybe less . and it somehow stabilize the output voltage to a level. now that voltage can be used to power many things. and this is awesome.

if you read these all . then I want to say its very hard to make these videos so please like and subscribe for more :-)


#Boost converter #buck boost converter#boost converter simulationclosed loop boost converter#boostconverter #design and simulation #buckboost Converter simulink matlabboost converter pi controller design #inverter #12volts #5volts #24Volts #dctodc #actodc #sepic #z44n #ne555