House2Start Chassis Battery Charger Around a Kisae DC-DC Charger Installation in a LTV

Описание: In this video I'm adding a House2Start chassis battery charger around a 50a Kisae DC-DC charger in a 2018 LTV Unity. The 2018 LTV owner previously replaced his isolator solenoid with a Kisae DC-DC charger for alternator charging of the house battery when driving. Now he realizes he needs a charging solution for his AGM Chassis battery. Adding a chassis battery charger like the House2Start to your Leisure Travel Vans (LTV) is an important upgrade because keeping your engine starting chassis battery charged helps ensure you can always start your engine.

It's understandable that there is alot of parasitic draw from your engine starting chassis battery. Vehicle Manufacturers have added lots of safety and convenience features that must be powered, even when the engine is off. With today's newer models the engine starting chassis battery can get discharged enough in just 2 weeks of sitting that it can't start your engine.

The House2Start is an actual multi-stage battery charger that keeps your chassis battery charged from your house battery charging sources. So if your solar system or inverter battery charger are charging your house battery, then the House2Start uses that same house battery charging power to keep your chassis battery charged up. The House2Start is compatible with any type house batteries and uses that battery charging to convert to the charging profile needed to charge your AGM lead acid chassis battery. The House2Start is a multi-stage battery charger so it provides Bulk, Absorption, and Float charging just like the battery chargers you have for house battery charging. The House2Start will correctly maintain your chassis battery charged up and ready to start your engine, no matter how long you've had it parked, even if it is for months! I've been using a chassis battery charger like this for 10 years on my LTV and I've never been stranded!

So don't wait get your House2Start today! Here are the key parts I used in this video:
Parts:
-House2Start, https://house2start.com/online-store
-VHB Tape, https://www.amazon.com/dp/B07K4PQG8P
-Optional Small Switch, https://www.amazon.com/dp/B09SCWWSLH
-Zip ties, https://www.amazon.com/dp/B01018DC96
-Wire loom assortment, https://www.amazon.com/dp/B07JQQRZWV
-Electrical tape, https://www.amazon.com/dp/B001AXD0EY

Tools:
-Deep well Metric sockets and socket wrench and screw driver set with Torx bits, Square Roberson bits, https://www.amazon.com/dp/B074MH432L
-Optional Insulated Socket wrench set, https://www.amazon.com/dp/B07R46J5QB
-Scissors
-Wire Stripper and Crimper, https://www.amazon.com/dp/B0C14P8T7F
-Wire Cutter, https://www.amazon.com/dp/B08BVXGGKC
-Heat gun, https://www.amazon.com/dp/B0D5TT5KZC; torch, https://www.amazon.com/dp/B07PFVN7WL, or Lighter for shrinking heat shrink connector covering shrinking.