Cunningham Amps Zonk MKI & Custom 35 2x12" — Feat. Jules Leyhe

Описание: I am so excited to welcome Cunningham Amps back to the channel with their Custom 35 2x12" Amplifier, and their Zonk MKI fuzz! I am VERY stoked to also welcome Jules Leyhe to the channel to lend his amazing touch and sensibility on slide guitar to usher this new amp into my studio.

Today, you'll be hearing Jules playing his Gibson SG loaded in Open E, and I'll be playing my new Giordano Guitars Veloce loaded with Sunbear Pickups SB-62PAT# humbuckers!

You'll be hearing us engage a full spectrum of tones from Tweed to Plexi, low gain and stacked/cascaded channels and parallel channels - and all of the above. We will also be slamming the amp with the Cunningham Zonk MKI fuzz and the Effectrode Tube Vibe. You'll be hearing analog tape delay from my Echo Fix EF-X3 in the Effects Loop of my Boss Waza Tube Amp Expander.

The Cunningham Amps Custom 35 is loaded with Scumback Speakers H75-PVC and S75-PVC 12" speakers @ 8ohm and rated 25w each. The cab is mic'd with 4 mics:
Royer R121
Lauten Audio LS-208
Royer R10
Ohma Ribbon

Get a Cunningham Amps Custom 35 Head and/or Cab here:
https://www.cunninghamamps.co.nz/prod...

Check out Cunningham's amazing hand-wired, vintage authentic, NOS transistor fuzzes here:
https://www.cunninghamamps.co.nz/effe...

Follow Edge of Breakup on Instagram:
  / edgeofbreakup  

Follow Jules Leyhe on Instagram:
  / julesleyhe  

Follow Jules Leyhe on YouTube:
   / @julesleyhe  

Check out Jules Leyhe's new Derek Trucks Slide Course:
https://julien-leyhe-s-school.teachab...

In Tim's words:
The Custom 35 is an all tube guitar amplifier available in both head and combo configurations. Two channels are foot switchable for running independently, in parallel or cascaded modes providing a diverse tonal pallet ranging from crystalline cleans to high gain tube saturation.
​
Channel 1 - Bite - Tweed style - big juicy cleans through to 'dimmed on 12' overdrive. ​
Channel 2 - Body - British style - classic Plexi tones for crunchy rhythm and singing leads.
​
Independent/Parallel channel switching modes
When running the amp in independent mode, activating the channel switch selects either Channel 1 or Channel 2. Each channel has it's own control for gain and tone so you can set up separate tones for rhythm and lead. In parallel mode - the channel switch selects either Channel 1 or both channels combined. In this mode, Channel 2 blends on top of your Channel 1 tone. Similar to jumpering channels on a dual channel amp - there's a huge range of tonal possibilities to experiment with when blending the channels this way. Channels can be switched on the fly using the foot controller or via the front panel.
​
​​Cascaded mode switch
In cascade mode, Channel 2 borrows an additional gain stage from Channel 1 to produce modern high gain tones. Channel 1 in this mode is crystal clean with a warm vintage vibe when driven. Channel switching works as above.

Cathode Biased Output Stage
The Custom 35 utilises a cathode biased output stage which adds to the organic, singing quality of the amp. It also allows different output tube types to be installed without needing to re-bias the amp. Fitted with EL34s as standard, try out a set of 6L6 or KT66 output tubes for a unique tonal signature.
​
Tube driven spring reverb is standard. Footswitch and fully padded custom cover also included as standard.

Quick Jump Chapters
00:00 Introduction
-----Jules Leyhe-----
02:40 Demo Begins, Jules on the Tweed Channel, Zonk Mode
05:00 Plexi Channel, MKI Mode
07:31 Cascading Tweed into Plexi Channel, MKI Mode, Uni-Vibe
09:10 Zonk Mode
-----Sean (Edge of Breakup------
10:13 Sean (Edge of Breakup), Giordano Veloce, Tweed Mode, Zonk Mode
11:53 MKI Mode
13:24 Tweed and Plexi Channels in Parallel
14:05 Zonk Mode

#cunninghamamps #tubeamp #tubeamplifier #guitar #guitaramp #guitaramplifier #boutiqueguitars #boutiquepedals #fuzzpedal #fuzz #fuzzpedals #newzealand #guitarpedals #slideguitar #bluesguitar