How to Replace Front Lower Ball Joint 2005-2010 Chevrolet Cobalt

Описание: Shop TRQ on 1AAuto.com
Ball Joint https://trq.video/ib-1ASBJ00313
Ball Joint Set https://trq.video/ia-1ASFK03492
Shop TRQ on Amazon
Ball Joint https://www.amazon.com/dp/B09J8P5GNK
Ball Joint Set https://www.amazon.com/dp/B0747PV91M

This video shows you how to install a front lower ball joint on your 2005-2010 Chevrolet Cobalt. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This repair was done on a 2007 Chevrolet Cobalt LT 2.2L Coupe 2-Door FWD and the process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• Pry Bar https://trq.video/oAw-1AXAA00020
• 13mm Wrench
• 16mm Wrench
• 18mm Wrench
• 15mm Socket
• 18mm Socket
• 19mm Socket
• Pickle Fork
• Air Chisel
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/o5k-1AXAA00044
• Liquid Thread Locker
• Center Punch
• Floor Jack
• Grinder
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Chevy Cobalt 2005-2010 1st Generation:    • Chevy Cobalt 2005-2010 1st Generation  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.