Power Transformer Body Assembly Frame, Assembly Platform for Power Transformer Coil and Active Parts

Описание: Transformer Body Assembly Frame meets the special equipment of 220kV transformer body assembly frame.Email:[email protected]、Whats app:+86 18632727083
Power Transformer Body Assembly Frame, Assembly Platform for Power Transformer Coil and Active Parts
Main Technical Specification of Transformer Assembly Frame
0.Load Capacity: Working platform bearing capacity: 1000Kg
Load bearing capacity of discharging frame: static load 10000kg, dynamic load 5000kg
Lifting range of operating platform: 1200-3000mm
Total length of assembly frame: 9500 mm, total height: ≤ 4500mm;
Operating platform width: 800mm
Length of discharging platform: 7000mm
Width of discharging platform: 800mm
Operating platform lifting way: Both-Side Synchronization
Walking speed: 2000mm/min
Structure Characteristics of Transformer Body Assembly Frame
TheTransformer Body Assembly Frame is mainly composed of left and right frame, operation platform, lifting platform, discharging platform, transmission mechanism, electric control mechanism, work guardrail and ladder.

Left and right frame : adopt rectangular steel pipe welding structure, the frame body is firm and reliable, the appearance is beautiful, and the operation is convenient and fast.
Operating platform of Assembly Frame: the table is equipped with a telescopic pedal, with a maximum expansion length of 600mm, a width of 250mm, a pedal spacing of less than 20mm, and a limited position when the pedal reaches the maximum position. Rubber protective pad shall be installed on the extended end face of the expansion plate, and the load of the telescopic platform shall not be less than 200kg.

Lifting platform: the lifting of the lifting platform is lifted by two lifting screws to realize synchronous lifting. which is stable, safe and reliable. The assembly frame is used in pairs.
Discharging platform for Transformer Body Assembly Frame: the discharging platform and working platform are ladder shaped frame. The step height is 800mm. The lower step surface is the working platform, and the upper step surface is the discharging platform. The working platform is made of checkered steel plate.
Work guardrail and ladder for Transformer Body Assembly Frame: the worktable is equipped with guardrail with a height of 1000mm. The guardrail is movable guardrail. The guardrail behind the discharging platform is 700mm, and the ladder is set on both sides of the assembly frame.
Transmission and operating mechanism for Transformer Body Assembly Frame: motor + reducer + worm screw elevator is used for lifting the operation platform. Two sets of centralized operation button stations are installed on the left and right frames, one for ground operation and the other for platform operation.
Application:
The assembly platform is a special equipment for large and medium
sized transformer assembly. This machine generally consists of 2
frame bodies that are placed face to face symmetrically, each
frame body can move independently, and complete the vertical
and horizontal adjustment of each working platform to meet the
different requirements for the operating position during the
transformer assembly work.
Main Features:
1 The lifting of the operating platform adopts motor + worm
gear reducer + screw lifting system(also can use the oil
cylinder lift, lifting speed can be adjusted freely), with the
mechanical and electrical double self-locking protection.
To ensure that the lifting platform can stop at any position
safely and reliably.
2 The middle of the platform have power supply socket,
which is convenient for the operator to use the electric
tools on the platform.
3 Several drawer type small supporting boards are
mounted under the platform, with fixing bolt. Fix the
bolts immediately after pull the small boards out to
avoid wounding caused by slipping.
4 Each side of each frame body have a 150W crank
arm illuminating lamp, and there is fluorescent lamp
under the platform, to increase the brightness and
convenient for operation.
5 The wheels of the platform adopt polyurethane wheels,
strong and durable, with enough mechanical strength,
no damage to the ground and no static.
6 Each frame body have 2 sets of centralized operation
button station, each 1 set for ground and working platform,
which will be easy for operation. Ground button control panel
and button station on the working platform can interlock to
avoid misoperation. Both moving motor and lifting motor are braking type.
7 High power illuminating lamp set on the top of the platform,
which can provide sufficient light during operation.
8 All the components involved in the safety requirements
are treated by heat treatment and flew inspection.
Main parameter:
1 According to the load capacity can be divided into:2T,3T,5T,10T,15T,20T,25T.
2 Platform dimension can be designed and made according to customer requirement.
Power Transformer Body Assembly Frame, Assembly Platform for Power Transformer Coil and Active Parts