Thrust Vectored! Freewing 90mm EDF JET RC PLANE REVIEW! 飞翼模型新品矢量推力战神涵道航模测评

Описание: This Ares model aircraft comes in two powertrain configurations: 6S and 8S. If you're looking to fly a crane, the 8S is the obvious choice; that's my pick. This aircraft arrives factory-finished with exceptional finish. Assembly requires only screwing in the tail and wings, a task that takes about 10 minutes. However, commissioning is a bit complex, requiring 13 channels to control the rudders, thrust vectoring, and flight control modes. Multiple mixing settings are also possible, and commissioning takes about 30 minutes.
The aircraft boasts an exquisite paint job throughout, available in two paint schemes: red and yellow. The paint is smooth and even, with virtually no visible graininess from foam. It also features four wing blades to increase the aircraft's lateral surface area, three CNC-machined metal landing gear with extended travel and shock absorption, and numerous hard-wearing plastic components.
As a stunt sports aircraft, the Ares is capable of graceful, standard aerobatic maneuvers without vectoring, easily and efficiently executing rolls, sideways, and somersaults. With vectoring engaged, the aircraft reveals a completely different style, with dazzling leaf-swinging maneuvers and various deep stall spirals. Assisted by the dual gyros, it can effortlessly execute crane maneuvers. Compared to hovering with propeller-driven 3D aircraft, the Ares is even more stable and simple. However, it's important to note that its residual thrust is limited, so be careful not to lose altitude and land when recovering from a hover.
Brand: ‪@FreewingRC‬
Model: AERS Ares
Powerplant: 90mm Vector Ducted
Required Battery: 8S 5000mAh Battery
Haozi's Equipment:
Frsky X20RS Transmitter, Dual TDR10 Receivers, Dapu 8S 5200mAh 85C Li-Ion Battery

这款战神航模分为6S和8S两种动力配置的版本，如果想玩吊机，那必然选择8S，这就是我的选择。这架飞机出厂完成度极高，装机仅需即可螺丝来安装尾翼、机翼即可，大约10分钟可以搞定。不过调试上稍微复杂，它需要13个通道，来控制舵面、矢量推力、以及飞控的模式，并且它还可以设置多种混控，调试时间大约30分钟。
细节上这架飞机全机精美的喷漆，并且有两款涂装可选，分别为红色和黄色。整机喷漆平整光滑，大部分地方是无法看出泡沫的颗粒感的。它还配有四个翼刀来增加飞机侧面积，三条大行程避震的CNC金属起落架，以及大量的耐磨塑料件。
飞行性能上，它作为一架特技运动机，在不开矢量时可以完成优雅的标准特技动作飞行，横滚、侧飞、筋斗等动作轻松高质量完成。打开矢量后，这架飞机就完全展露出它的另一种风格了，落叶飘、各种深度失速螺旋眼花缭乱，在双陀螺仪的辅助下，吊机动作可以轻松完成，相比螺旋桨3D机的悬停，战神甚至更加稳定简单，不过需要注意的是，它的剩余推力并不大，注意悬停改出时不要掉高度落地。
品牌：飞翼模型
机型：AERS战神
动力：90mm矢量涵道
需要电池：8S 5000mAh电池
昊子使用的设备：
睿思凯X20RS遥控器，双TDR10接收机，达普8S 5200mAh 85C锂电池