Ford 8560 New Holland Range transmission calibration with hydraulic pressure test

Описание: Semi power shift transmission
Transmission Calibration procedure for Tractor NEW HOLLAND TM Series and 60 series .TM 165 Range Command Calibration Mode
Handbrake UP !
Press and hold both the upshift and downshift buttons whilst starting the tractor.
On entering the calibration mode, the display will
show the temperature of the transmission oil in
degrees centigrade. To continue with the calibration
–
Set the engine RPM to 1200 +/– 50
Place the shuttle lever in FORWARD
Press the upshift button to select clutch A.
If the start up procedure was incorrect, or if the oil is
at the incorrect temperature, a U code will be
displayed.
Press and hold the downshift button to calibrate
clutch A.
Keep the downshift button depressed until the
engine speed decreases by 50 RPM and the
calibration number alternates with the clutch
identifying letter.
Release the downshift button to progress to the
next clutch.
Follow the same procedure as clutch A to calibrate
clutch B.
Then continue in the same manner for clutches
C,D,E and F calibration.
Calibration “F”, moves the two range synchronisers
into the neutral position. If all is OK, “CF” will appear.
NOTE:
The two range potentiometers are automatically
calibrated during the calibration of the five clutches.

At this point, the calibration has been completed, and
the Key start can be switched off to store the new
calibration figures.