Point 2 Point: Leica RTK Rover using NTRIP correction v10 Firmware-off GS18NTRIP Base
Автор: Jeff Ryall
Загружено: 2026-01-27
Просмотров: 51
Описание:
00: 00 Introduction -NTRIP rover overview
00:30 Overview Base (video 1) Static IP APNs
00:55 APN options for rovers- DAC SIM Card overview Multi carrier option
01:40 FW v10 Captivate for NTRIP Base- thus allows Drones and/or RTK rovers to work off base
02:10 Example of stake point under 1cm Horizontal and vertical- extremely accurate
02:30 Settings on Leica Rover- SIM Card and APN for Internet
03:10 RTK settings of workstyle ensure using RTCM V3 data
03:45 Select server define NTRIP settings IP, Port and UN and PW
04:15 Select verify Mountpoint for GS18 Base
05:45 Load Workstyle on CC180
06:15 Check SIM settings and APN
06:45 Bluetooth to GS sensor (First time setup)
07:00 Select job with check points and then access Measure application
07:45 Access NTRIP server and check-define settings IP, Port, Ntrip UN & PW and check correct Mountpoint
09:45 "Start stream RTK Data" key to receive rtk corrections from base and then fix
10:30 Stake out Check point, to ensure base is on correct point before working on project.
11:45 Check Baseline length to base and RTK status info, other options to ensure getting data from your distinct base
12:45 Review real time data and look at CQs 1D vertical 2D horizontal all under 1cm - to ensure good RTK data and tight RTK data for job
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
