MR2 Spyder Vinyl Wrap Tips + Spoiler

Описание: *It's difficult to tell how much of the color fade is due to sun damage vs trapped dust in the ceramic coat. I've tried using brake cleaner to remove the dust and ceramic coat, but there was still some fade to the vinyl underneath. I did try the brake cleaner on a fresh piece of vinyl and i did not see any change. I suppose some fade is to be expected under the summer sun.

Non-professional wrap installation done on my driveway; learned a few things in the process. LuxuryPart spoiler installed, Tein Flex Z coilovers.

The reason i chose to wrap was because the original paint had been sprayed with a lower quality paint. The clearcoat was peeling, so i had to remove all of it as wrapping would be impossible when so many chunks if clear coat being stripped off and bunching up. A good paint job that will last 5-10 years would be in the thousands, and i just needed something to make the car look "good". So a $500 wrap was worthwhile especially since i gained experience with wrapping this car. Repairs are also easier to since you can peel and apply vinyl to any area.


00:00 Basic info
00:35 Some mistakes made
01:10 Wrapping tips
01:15 Front bumper
01:55 Front hood
02:20 Front quarter panel
02:30 Windshield frame
03:10 Door handle
03:20 Door
03:45 Mirror
04:12 Bottom panel/undercoating
04:36 Rear quarter panel/fuel door
05:10 3 strip panels
05:24 Rear hood
05:52: Rear bumper/trim pieces
06:36 ONI?
06:48 Joining pieces
07:18 LP Spoiler
08:05 Tein coilovers
08:30 Last mentions