How to Replace the Titan RF CO2 Laser Source

Описание: Is your Thunder Laser Titan moving but not firing? It might be time to replace your RF CO2 Laser Source. In Part 2 of our Official Titan Laser Source Replacement Series, Laurent walks you through the complete, industrial-standard procedure to swap your source safely and align your beam center.

⚠️ CRITICAL WARNING: Do not reinstall your optics (Beam Expander/Shutter blade) until you have verified the beam centering.
🛑 PROBLEM SOLVER: If your control panel freezes or locks up after removing the shutter, watch the "Secret Reset" technique at 2:53!
This video covers the complex disassembly of the optical path, the "Two-Wrench" rule to prevent damaging your new source, and the specific Emergency Stop sequence needed to bypass safety interlocks for testing.

MISSING A PART OF THE SERIES?
▶️ Part 1: How to Replace the Titan Fiber Laser Source    • How to Replace the Titan Fiber Laser Source  

🔧 What you’ll learn in this tutorial:
0:00 - The "Heart" of the Titan
0:26 - Step 1: Tools Required (Don't forget the wrenches!)
0:47 - Power Down & Safety
1:01 - Step 2: Removing the Optical Assembly
1:21 - Main Holder Assembly Removal
1:44 - Do Not Twist the Stud (Use 2 Wrenches)
1:58 - Step 3 - New Laser Source Installation
2:31 - STOP! Do Not Install Optics Yet
2:53 - Step 4 - Preliminary Setup & Laser Beam Centering Verification
3:44 - Step 5 - Adjustment & Reassembly
4:08 - Don't Overtighten! Must Rotate Freely
4:30 - Conclusion & Happy 2026!

🔗 Learn more about the Titan Pro Series: https://bit.ly/4oe94A
Need Technical Help? 📝 Open a Support Ticket: https://support.thunderlaser.com/port...

About Thunder Laser:
Our mission is to empower makers and businesses with powerful, precise, and reliable laser technology. We build the tools that turn your ideas into reality.

𝐅𝐨𝐥𝐥𝐨𝐰 𝐮𝐬 𝐟𝐨𝐫 𝐦𝐨𝐫𝐞 𝐢𝐧𝐟𝐨:
Facebook:   / thunderlaser.official  
Instagram:   / thunderlaser.official  
Pinterest:   / thunderlaser_official  
Linkedin:  / thunderlaserofficial  
Tiktok:   / thunder.diy.design  
Facebook Group:   / thunderlaserfans  
Reddit:   / thunderlaserofficial  

#thunderlaser #thunderlasertitan #thundertitan #setup #networksetup #CraftingInnovation #DIYProjects #lasercutting #laserengraving #lasermarking #lasermachine #businessideas #rftube #diy #mopalasermarkingmachine #RFforAll #HelloRF #stepbystep #howto #laserhack #tutorial #replacement #lasersource #fiberlaser