Converting a Nebra Crypto Miner To A Meshcore High Power Repeater

Описание: How to convert a Nebra outdoor crypto miner, into a high power Meshcore or Meshtastic repeater for off grid communication. I came across quite a few people trying to do this and a lot of people were just repurposing the case, so I came up with a cheap way of doing it while using pretty much all of the original hardware. The cost to do this is around £10 in parts, and a bit of time. I'll show you how to convert the hardware, and install all of the software needed to do this and get it up and running.

It is also fully reversible if you even want to convert it back to it's original use.

If you enjoyed this video, or found it useful or helpful, please consider subscribing. It's free and you'll be notified when I upload more videos.

Thank you for your support!

Reference Images:
Restoring the missing signals from the header: https://ibb.co/rBmRLBv
How to wire the E22 Module up to the header: https://ibb.co/23Fyqw8S

Software that I used:
Raspberry Pi Imager: https://www.raspberrypi.com/software/
Putty (for SSH): https://www.chiark.greenend.org.uk/~s...
Link to pyMC_Repeater github: https://github.com/rightup/pyMC_Repeater




#electronics #meshcore #meshtastic #offgrid

Convert a Outdoor Nebra Helium Miner to Meshtastic
Convert a Outdoor Nebra Helium Miner to Meshcore
Nebra Outdoor to Meshtastic
Nebra Outdoor to Meshcore
Crypto Miner to Off Grid Repeater
Nebra Miner to Meshcore
Nebra Miner to Meshtastic