Display of SUNHANS SH24Gi4000 2.4Ghz 4W 36dBm Wireless Signal Amplifier, fit for uav, router, etc

Описание: This is a short display video about 2.4GHz 4W WiFi Signal Booster Indoor 36dBm SH24Gi4000 model, Network WiFi Amplifier for Drone/Camera to enhance 2400~2500MHz Signal.

WHERE TO GET THIS 2.4GHZ AMPLIFIER DEVICE?

https://www.ebay.com/itm/303435948362
https://www.s-booster.com/

Or, directly contact us, [email protected] , for possibly detailed info or technical support.

1. [Simply plug and play]

Extend the range of your wireless network with the Indoor Wifi Booster Amplifier.

Plug and play connections,no software, no configuration and virtually no setup of software.

2.[Compatible with any 2.4G wireless device]

WiFi booster amplifier sunhans wifi amplifier compatible with any type of 2.4ghz transmitter andand receiver,4000mW (36dBm) high output power for home office wireless signal coverage, for routers, IP camera, Bluetooth, walkie-talkie, drones,rc drone flight controller ZigBee,security camera system extend wireless signal range.


Model: SH24Gi4000P

[About Input power of Booster]

(output power of the device = input power of the amplifier),

Sunhans SH24Gi4000 booster input power 0~20dBm(18~19dBm will better),if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know,we will give the suggestion to solove this question according to your actual situation.

[Maximum Output power]

In ideal situation,the max output power can be up to 4W(36dBm).This amplfier will boost the receive and transmit (RX and TX) power of your wireless device to about 36dBm.

After connected with Booster,the output power at the antenna end is transmit gain of booster + Output power of the device - Signal loss of Cable/Connector.

Technical Specifications:

Booster Model: SH24Gi4000

Operating range : 2400~2500MHz

Channel width: 20Mhz&40Mhz

Supported standards: IEEE 802.11b/a/g/n

Operation mode: Bi-directional, half-duplex, time division duplex

Connector type: To radio SMA female (hole inside).

To antenna RP-SMA female (pin inside)

Output power: 4000mW (36dBm)

Input power: 0 ~ 20dBm

Transmit gain: 17 – 20dB

Receiver gain: ≤12dB



Noise figure: ≤3.5dB typical

Frequency response: ±1dB over operating range

Power adapter: 6V/2A DC, 100~240V

Operating temperature: -20°C to +70°C

Operating humidity: Up to 75% relative humidity

Material: Cast aluminum

LED light: Power status / activity status LED

Booster weight: 133g

Booster size: 9.7 x 6.4 x 1.7cm

Package contents:

1 x SH24Gi4000 WiFi booster

1 x RG316 cable with SMA connectors (20cm)

1 x 6dBi omni antenna

1 x power supply