Kel-Tec RDB: Part 2, Reloads and Malfunctions

Описание: In this video we go over how to operate the RDb with reloading magazines and malfunctions.

https://referral.rumble.com/d9L7

In this *Part 2* video about the *Kel-Tec RDB Bullpup Rifle**, we are diving into **magazine reloads* and **operating malfunctions**, providing insight into the rifle's unique handling characteristics. Here's a breakdown of the key points discussed:

1. *Approaching the RDB Differently*
Emphasis is placed on not trying to treat the *Kel-Tec RDB* like a rifle you're already familiar with (such as the **AR-15**).
Understanding the unique design and operation of the RDB helps in operating it *efficiently* and **smoothly**.

2. *Indicators of Gun Status (What the Gun Tells You)*
The *RDB* doesn’t have a *chamber window* for visual inspection, so the *piston* and its movement serve as indicators:
**In Battery**: Piston is in the forward position.
**Locked Open**: The bolt is locked back, indicating an empty magazine.
**Obstruction**: The piston may not fully move forward if there's an obstruction.

**Charging Handle Feedback**:
When you pull back the charging handle, if it snaps forward, the gun is ready.
If it locks open, you have an empty magazine.
If it stops halfway, there’s an obstruction.

3. *Reloading Techniques*
**Tactical Reload**: Swapping magazines without discarding the current one, ensuring you keep a partially used magazine for later use:
**First Method**: Push the new magazine up against the current magazine, engage the magazine release, rotate, and insert.
*Second Method* (preferred): Hold the new magazine against the frame, slightly elevated, use the support hand to engage the magazine release, and insert the new mag.

**Speed Reload**: Quickly drop the empty magazine and insert a new one for faster shooting:
*Wife’s Preferred Method**: Rotate the gun, drop the empty mag, and insert a new one. Use the **bolt catch* to drop the bolt or manually charge it.
**Your Method**: Rotate, drop the magazine, insert a new one, and charge manually.

4. *Malfunctions & Clearing Techniques*
**Light Primer Strike / Failure to Feed**:
Tap the magazine and rack the bolt to ensure proper chambering and reset.
This will resolve both *light primer strikes* and *failure to feed* malfunctions by either seating the magazine properly or ejecting a bad round.

**Double Feed**: A more severe malfunction, where two rounds are trying to be chambered:
**Identify the Issue**: Recognize that the bolt isn’t going into battery due to an obstruction.
**Clearing the Double Feed**: Lock the bolt open, remove the magazine, clear any obstructions, and rack the bolt a few times.
If the issue persists, you may need to *manually check and clear* the action, though this is rare with the RDB.

**Preventing a Double Feed**: Ensure you clear malfunctions early by identifying issues rather than just trying to force the gun to operate. Always address any sign of a malfunction before continuing to reload or fire.

5. *General Advice for Troubleshooting*
It’s crucial to *identify the issue* before attempting to operate the gun further. Ignoring malfunctions can make them worse, such as introducing more rounds into the chamber during a double feed, which can cause the bolt to jam completely.
If you encounter repeated issues like *double feeds**, consider **adjusting the gas pressure* to the proper level, as this could help in preventing them.

Conclusion
This video effectively covers how to handle *reloads* and *malfunctions* with the *Kel-Tec RDB**, stressing the importance of **understanding the unique design* of the bullpup rifle. By adapting to its distinct features and being mindful of the feedback it provides, you can operate it smoothly and resolve issues efficiently.

You wrap up with a call to action, encouraging viewers to leave comments for follow-up questions or suggestions for future videos. This approach ensures that you're engaging with your audience and providing more educational content.

Overall, this was a thorough and practical guide for those new to the *Kel-Tec RDB* or interested in improving their handling of it.