Fly screen pleated retractable 2in1 window from Windhager Home & Garden - Mounting instruction

Описание: In this installation video, we show you how quickly and easily you can set up and install our insect screen for your door. Suitable for the following Windhager products: 03966

Tools needed: drill, rolling metre, cutter/scissors, file, miter box, pencil, screwdriver, saw, spirit level

00:00 Unboxing
0:14 Measure the width B of the reveal by the horizontal wall-to-wall distance. Measure the height H of the reveal by the vertical wall-to-wall distance
0:32 Mark the pleated cassettes on both sides according to the formula. Shorten them with a metal saw
0:53 Mark the guide rails according to the formula. Shorten them with a metal saw
1:04 Deburr the cuts with a metal file
1:16 Guide the cords along the profile groove on both sides. Insert it there at the end of the profile. Attach the cord guides on the side of the handle rails
1:28 Put the guide pulleys on both sides into the recess provided on the cord guides. The cord runs over the guide pulleys
1:59 Connect the upper corner connectors on both sides to the guide rail and the pleated blind cassette. Connect the lower corner connectors on both sides to the guide rail and the pleated blind cassette
2:17 Insert the grub screws for fixing the cords to the recesses of the corner connectors. Pull the cords hand-tight and turn the grub screws in so that the cord is clamped. Repeat this process on the other side
2:43 Hold the pleated blind in front of the window reveal on the ceiling. Mark the drill holes through the recesses on the corner connectors. Drill into the ceiling with a drill (Ø 6 mm). Insert the dowels into the drill holes. Screw the pleated blind through the recesses in the corner connectors
3:08 Cut the cuffs of the pleated blind cassettes and check the function of the fabric
3:15 Knot the cords and shorten them with an overhang of 50 mm
3:25 Place the cover caps on the corner connectors