How to Replace Accessory Drive Belt Tensioner 2011-2020 Toyota Sienna

Описание: Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com https://trq.video/id-1AEBT00110

This video shows you how to install a new accessory drive belt tensioner from TRQ on your 2011-2020 Toyota Sienna.

This repair was done on a 2011 Toyota Sienna Limited 3.5L Mini Passenger Van 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Toyota Sienna
2012 Toyota Sienna
2013 Toyota Sienna
2014 Toyota Sienna
2015 Toyota Sienna
2016 Toyota Sienna
2017 Toyota Sienna
2018 Toyota Sienna
2019 Toyota Sienna
2020 Toyota Sienna

Tools you will need:
• 10mm Socket https://trq.video/obVy-1AXAA00017
• 12mm Socket https://trq.video/ocpj-1AXAA00015
• 14mm Deep Socket
• 14mm Socket https://trq.video/ocpj-1AXAA00015
• 21mm Socket
• Trim Tool Set https://trq.video/oaF9-1AXXX00006
• E8 Inverted Torx Socket
• Block of Wood
• Gloves https://trq.video/obxG-1AXSS00048
• Safety Glasses
• Jack Stands https://trq.video/oav7-1AXAA00065
• Magnet - Extendable
• Pick https://trq.video/o9G-1AXAA00037
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Toyota Sienna 2011-2020 3rd Generation:    • Toyota Sienna 2011-2020 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.