Chrysler 300 K&N Cold Air Intake: How To Install A Cold Air Intake | Full Installation Guide

Описание: Looking to boost the performance of your 2015 Chrysler 300S? In this video, we’ll be walking you through the entire process of installing a K&N cold air intake on your Chrysler 300S. Adding a cold air intake is one of the most effective modifications you can make to improve your engine’s performance, increase horsepower, and enhance throttle response. Plus, it gives your ride that aggressive sound that will turn heads on the road!

We break down every step of the installation, from start to finish, so you can easily follow along and do it yourself. Whether you're a car enthusiast or just getting started with performance mods, this guide will help you complete the install like a pro.

Tools needed:

8mm Socket
10mm Socket
1/2in Socket
9/16in Socket
5/32in Allen Key
Ratchet w/Extension
Teflon Tape/Thread Sealant
Lubricant

What You’ll Learn in This Video:

Step-by-step instructions for removing the stock air intake system.
How to properly install the K&N cold air intake and make sure everything fits perfectly.
Essential tools you’ll need for the installation.
Tips for ensuring you get the best possible performance boost from your new cold air intake.
The benefits of upgrading to a K&N cold air intake, including better fuel efficiency and improved engine sound.

Why Install a K&N Cold Air Intake? Upgrading to a K&N cold air intake will not only give you noticeable performance gains but also improve engine efficiency and air filtration. This mod can be a game-changer for anyone looking to maximize their Chrysler 300S’s power output, whether you're cruising on the highway or taking it to the track.

As always, we’ve also included a detailed written guide with even more in-depth information for your convenience. You can find the link to the full guide below for additional insights and troubleshooting tips.

If you run into any issues, have questions, or just want to share your results, drop a comment below—we love hearing from fellow gear heads!

Remember to LIKE, COMMENT, and SUBSCRIBE for more performance mods and car tutorials. Hit that notification bell so you never miss an update on our latest videos. Your support helps us create even more awesome content!

Thanks for watching, and happy modding!

Instagram:   / renegade_rebuilds  
Email: [email protected]

Chapters:

0:00 Intro
0:25 Removing Engine Cover
0:40 Loosening The Intake From The Throttle Body
0:55 Unplugging MAP Sensor
1:05 Removing Air Box
1:15 Removing PCV Hose
1:25 Continued Air Box Removal
2:20 Removing Upper Portion Of The Intake
2:45 Removing Lower Half Of Air Box
3:00 Installing Gromet
3:15 Working On Heat Shield
3:50 Installing Heat Shield
4:15 Installing L-Bracket/Attaching To Heat Shield
5:05 Installing New PCV Hose To New Intake Tube
5:50 Installing Rubber Boots To Intake Tube
6:45 Installing L-Bracket
7:00 Installing New K&N Intake Tube
7:30 Attaching The New PCV System
7:45 Attaching Intake Tube To L-Bracket
8:10 Fully Tightening The Heat Shield
8:35 Installing New Filter
9:00 Tightening Down L-Bracket
9:30 Tightening Down Boot Clamps
10:20 Tightening Final L-Bracket
10:40 Removing MAP Sensor
10:50 Installing MAP Sensor Into New Intake
11:22 Before & After Sound