DIY Friction Drive Electric Bike Project

Описание: Hello guys, here is my little project, converting my road bike into an electric bike. I hope you will enjoy this video and if you like it please don't forget to press the like button and subscribe to this channel for more videos and projects. Thank you!

the max speed in this setup is about 33km/h on the GPS and fully charged battery (25.2v)
after battery starts discharging is going to about 25km/h
this motor can handle 12 cell ESC but because was too expensive i bought the 6cell ESC



parts list
motor: alomejor 6384 120kv 4600w 24-36v paid about 70£

battery: zeee 6s lipo battery 5200mah 22.2v 50c cost now 76£

ESC: surpasshobby kk 150a waterproof cost now 57

vipmoon 2 pack 3ch 4.8-6v servo tester 8£

ballanced battery charger : keenstone c1-xr 100w 6cell
I believe comes with battery tester paid about 30£

watt meter: arceli 150a (was not mounted on the bike) cost now 11£

griptape for motor : toomett anti slip tape

when i start this project i had different motor esc etc. I didn't know anything about esc/motors battery etc. so with information i got from google/youtube i managed to finish this project somehow. this is not the perfect bike but works fine. i didn't have the tools/screws mounts, i had just the bike.
because first time i bought the wrong motor/esc and all the tools, drilling machine, bits, bars screws etc and i had different attempts to make it electric (with chains and sprockets), bets and pinions the total cost of everything was about 750£, so basically a brand new e-bike from the shop and that is legal for the roads in the UK. so i will recommend to think very well when you start a project like this one. i will try to make a video in the future how i started because i have some videos in my computer. thank you.