Redmi 10A camera glass replacement | HOW TO install redmi 10a camera glass

Описание: Replacing the camera glass on a Redmi 10A requires careful handling. Here’s a step-by-step guide to help you install a new camera glass:

Tools Required

Replacement Redmi 10A camera glass

Heat gun or hairdryer

Plastic pry tool or tweezers

Isopropyl alcohol & microfiber cloth

Adhesive (pre-cut adhesive or B-7000 glue)

Step-by-Step Guide

Power Off & Remove Case

Turn off the phone and remove any protective case.

Heat the Broken Glass

Use a heat gun/hairdryer for 30-60 seconds to soften the adhesive around the broken camera glass.

Remove the Broken Glass

Use a plastic pry tool or tweezers to carefully lift and remove the damaged glass pieces. (Be cautious not to scratch the camera lens inside.)

Clean the Area

Use isopropyl alcohol and a microfiber cloth to remove any dust, adhesive, or glass shards.

Apply New Adhesive

If your replacement glass has pre-applied adhesive, just peel and apply.

If not, apply a thin layer of B-7000 glue around the camera cutout.

Install the New Camera Glass

Align the new glass properly and press it gently into place.

Hold for a few seconds to ensure it sticks.

Let it Set

If using B-7000 glue, let it dry for at least 30 minutes before using the camera.

Final Check

Ensure no dust is trapped under the glass.

Open the camera app and check for any blurriness or obstruction.

Note: If you’re not confident, it’s best to visit a professional repair shop.

Would you like recommendations on where to get quality replacement glass?