How to Replace Garage Door Lock Barrel / Cylinder (EASY IF STILL OPENABLE)
Автор: How To Videos And Tips
Загружено: 2018-10-04
Просмотров: 91524
Описание:
Five Minute Job if all goes well! Just one screw to unscrew. Our key had become more difficult to turn (jiggling required). Would of done it years ago if I had known how easy it was. took the old lock barrel out measured its length 40mm and then ordered one on eBay. The tricky part was realising that once the screw was removed that the key had to be turned to the unlocked position before I could withdraw it from the Garage Door. Also lining up the new barrel to get to locate the screw hole.
IF YOUR LOCK IS GETTING HARDER TO LOCK PLEASE REPLACE IT BEFORE IT BREAKS COMPLETELY AND YOU CAN NO LONGER OPEN THE DOOR AT ALL.
IF YOU GARAGE DOOR IS BROKEN SUCH THAT YOU CANNOT OPEN IT ALL THEN YOU WILL LIKELY HAVE TO DRILL IT OPEN. (DID YOU TRY WD40 spray?)
Garage Door Lock Barrel Cylinder for Garage Door Makes: Cardale Garador Hormann Apex Henderson Hormann.
The old lock was entirely seized luck that it would turn just one last time to get the locking tongue back into the ''open' position i.e inside the barrel.
How to Replace Garage Door Lock Barrel / Cylinder (EASY)
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
