Cold Shrink | 3M Standard MV Cable Joints With Taped Electrode

Описание: 11kV-33kV Cold Shrink MV Cable Joints - 3M

THORNE & DERRICK | 3M ELECTRICAL & COLD SHRINK MAIN UK STOCKISTS
Contact us for Competitive Prices & Fast Delivery from Stocks

3M Standard Cold Shrink Cable Joints with taped electrode splice offers a viable cost-based alternative to heat shrink cable jointing technology. Unlike heat shrink alternatives a molecular permanent set ensures constant radial pressure is exerted on the MV-HV cable for the duration of the cable joints life.

The Cold Shrink MV cable joint range covers many of the most common cable configurations and size ranges. The electrode in this case is built up by the cable jointer using 3M Scotch 13 Electrical Tape and the 3M Cold Shrink joint ensures no heat or tools are required.

See complete 3M Electrical Product range http://www.powerandcables.com/manufac...

View more 3M Cold Shrink Cable Joints for medium/high voltage cables including 11kV 33kV 66kV and 132kV http://www.powerandcables.com/product...

The MV Cable Joints from 3M are available for both single core cable connections and the range can be viewed here http://www.powerandcables.com/product...

See also from 3M Electrical:
Cold Shrink Tubes
https://www.powerandcables.com/produc...
Scotchcast Resins
https://www.powerandcables.com/produc...
Scotch Electrical Tapes
https://www.powerandcables.com/produc...

THORNE & DERRICK INTERNATIONAL

Thorne & Derrick International are specialist distributors of LV, MV & HV Cable Installation, Jointing, Duct Sealing, Substation & Electrical Equipment – servicing UK and global businesses involved in cable installations, cable jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV.

Stocking & Supplying Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV | UK & Export Sales

Phone: +44 (0)191 410 4292
Email: [email protected]
https://www.powerandcables.com/

-----------------------------------------------------------------------------------------------------------
0:00 Introduction
0:08 3M™ Standard Cold Shrink Joints With Taped Electrode
0:32 Install connector
1:41 Using 3M™ cable cleaning wipes, clean the cable and connector
1:59 Fill mechanical screw holes with Scotch-Seal 5313 mastic
2:19 Over tape the connector with Scotch 13 tape
3:18 Apply 3MTM P55 silicone grease
3:55 Install the joint body over the connector
5:15 Over tape Scotch-Seal 5313 mastic tape with Scotch 2228 mastic tape
5:55 Reposition copper wire sleeve over joint and fox in place with constant force springs
6:57 Apply Scotch 2228 mastic pad covering PVC tape and cable jacket
8:08 Apply Scotch 2228 mastic tape
8:23 Install larger protection tube