36V 250W Electric Hub Motor DIY Disassembly - replacing Damaged hall-sensor and gear motor clutch

Описание: We’re going to use a front motor to demonstrate how to disassemble motor partially
Hub Ebike Conversion Kits:https:https://www.aliexpress.com/item/40007...

Ebike battery:https://www.aliexpress.com/item/10050...

E-Bike Controllers:https://www.aliexpress.com/item/10050...

1)Remove the screws and spacers from the motor cover
2)Separate the rim and motor core
3)Remove the motor cover
4)You can see some accessories inside the motor
5)Here is the hall sensor board and some connecting wires and copper wires
6)The other side is Gear motor clutch with nylon gear
7)And, to remove the nylon gear Assembly You need to use spring pliers to remove this snap ring
8)To reassemble the motor, just reverse the disassembly process
9)When installing the gear motor clutch, you need to turn the gear set slightly and press firmly
10)Use spring pliers to install the snap ring
11)Install the motor cover and put the whole assembly back
12)Install the screws and spacers
13)so that’s the quick video for disassembling and reassembling an easy kind to it .Thanks for watching your easy motor disassembly video.