Thunder NOVA 24 LED light Upgrade.

Описание: Here is my LED upgrade to my Thunder laser NOVA 24 laser. This may also work on other lasers as well. If not able to use as described try adding power supply as a stand alone system to power lights.

****Do this as you wish at your own risk, i am not responsible for any damage that may occur is done improperly.
****Always make sure power is off when working on your laser
Tools required:
--Needle nose pliers
--Side cut or flush cut pliers
--Wire stripers
--Wire Crimpers
--#2 Phillips head screwdriver
--Small jewelers flathead screwdriver
--Heavy Duty double sided tape
--Heavy duty Cleaner for surface prep
--low lint rag
--soldering iron and soldier
--Heat shrink tube (optional)
--18-22 awg wire (18awg RGB LED wire used by me)
Parts used:
--ALITOVE LED Strip Lights Waterproof Daylight 24V
https://www.amazon.com/gp/product/B07...
--Rocker Switch.
https://www.amazon.com/gp/product/B08...
--Mean Well LRS-150-24 AC/DC Switching Power Supply 156W 24V 6.5A
https://www.amazon.com/gp/product/B07...
--DZS Elec 30pcs Screw Type Quick Connect Terminal
https://www.amazon.com/gp/product/B07...
--M4 x 12mm self taping screws
https://www.amazon.com/gp/product/B07...
--XHF 1000 PCS AWG 20 Ferrule Crimper Plier Insulated Crimp Pin Terminal Cord End Terminals, Wire Ferrules Terminals, Wire Connector, Insulated Cord Pin End Terminal
https://www.amazon.com/gp/product/B07...