Easy DIY Brake Pad Replacement: Lamborghini Gallardo Superleggera. Fix Any Lamborghini Gallardo

Описание: This quick and easy DIY shows you how to replace the brake pads on a 2004 to 2008 Lamborghini Gallardo to include the Lamborghini Gallardo Superleggera

This easy DIY fix is something anyone can do with simple hand tools. Tune-up your Lambo to make sure you can stop after getting on the V10!


Carbon Ceramic 08 Superleggera Brake Pads Both Front and Rear, PAGID 4907 RSC1: https://amzn.to/3fVzYLy
Carbon Ceramic 08 Superleggera Replacement Hardware Both Front and Rear: https://bit.ly/3LP8JzT
Carbon Ceramic 08 Superleggera Wear Sensors Both Front and Rear: https://bit.ly/3GqwsoZ
Carbon Ceramic 08 Superleggera Wear Sensor Delete, You need 4: https://www.ebay.co.uk/itm/133831468110


Steel Brake Pads 2004-2014 Front, OEM 400698151: https://www.bullstuff.com/brake-pad-k...
Steel Brake Pads 2004-2014 Rear, OEM: https://www.bullstuff.com/brake-pad-k...
Steel Brake Pads 2004-2014 Front, EBC Yellowstuff, Great On The Track and Street: https://amzn.to/3Ao7V0S
Steel Brake Pads 2004-2014 Rear, EBC Yellowstuff, Great On The Track and Street: https://amzn.to/3GUwt3T
2004-2014 Steel Rotor Replacement Hardware Front 400698135: https://www.bullstuff.com/fastening-p...

2004-2014 Steel Rotor Replacement Hardware Rear 400698135A: https://www.bullstuff.com/fastening-p...
2004-2014 Steel Rotor Wear Sensor Delete, You need 4: https://www.ebay.co.uk/itm/133831468110


Hand Calipers for measuring rotors: https://amzn.to/3qRlCT0
19mm Padded Wheel Socket: https://amzn.to/3H7sKQA
Brake Fluid To Top Off Reservoir: https://amzn.to/33VyaQ9
Brake Fluid Bleeder: https://amzn.to/3GX6clM
Wheel Pin M14x1.5 : https://amzn.to/3qSqNBW


CARBON CERAMIC BEDDING IN PROCESS:
1. brake pads new, brake disc new
10 stops from appr. 80km/h to appr. 30km/h with light deceleration
20 stops from 100km/h to appr. 50km/h with medium deceleration
avoid follow-on stops.
between the individual stops let the brakes cool down.
Duration of the procedure appr. 30 minutes

2., brake pads new, brake disc used
5 stops from appr. 80km/h to appr. 30km/h with light deceleration
10 stops from 100km/h to appr. 50km/h with medium deceleration
avoid follow-on stops.
between the individual stops let the brakes cool down.
Duration of the procedure appr. 20 minutes.

STEEL BEDDING IN PROCESS:
Step 1: While the vehicle is stationary, pump the brakes to ensure a firm pedal.
Step 2: Drive the vehicle with utmost caution and ensure the brake system is working properly.
Step 3: Applying moderate brake pressure, make 6 to 10 stops to 5 MPH (8 KM/H) from approximately 30 to 35 MPH (48 KM/H to 56 KM/H). After each stop to 5 MPH (8 KM/H), immediately accelerate back up to speed and repeat the process.
Step 4: Make 2 to 3 stops to 5 MPH (8 KM/H) from approximately 40 to 45 MPH (64 KM/H to 72 KM/H). After each stop to 5 MPH (8 KM/H), immediately accelerate back up to speed and repeat the process.
Step 5: Cruise at 45+ MPH (72+ KM/H) for 10 minutes to allow the brake system to cool.
Step 6: Inspect the rotor visually. Make sure there is an even layer of wear on the entire rotor surface. Otherwise, repeat steps 3 to 6. Inspect brake rotors frequently to avoid overheating.

I believe in transparency on the web and so I am disclosing that I’ve included certain products and links on this site that I will earn an affiliate commission for should you decide to make a purchase.
My goal with this site is to help educate you on the possibilities that exist online and also to be a powerful resource for you, but please understand I am doing this as a for-profit business.
Given this, you should assume that any links leading you to products or services are affiliate links and I will potentially receive compensation should you decide to buy. I only promote products or services that I have investigated and truly feel deliver value.
Please note that I have not been given any free products, services or anything else by these companies in exchange for mentioning them on the site.
If you have any questions regarding the above, please do not hesitate to contact me by reaching out to [email protected]