LF2936FHD Quick Set Up Guide

Описание: Set up your baby monitor for enhanced connectivity and benefit from product firmware updates.

First, connect the Parent Viewer to the adaptor and mains supply.

Make sure you raise the antenna of the parent viewer. It is a necessity, or the monitor will not function normally.

Then, Connect your baby unit to the adaptor and main supply, and switch it on.

Also, check that your Wi-Fi network is online, password protected, and your internet speed meets the minimum requirements for streaming video.

Now, you can tap on the parent viewer screen or use the keypad, and follow the instructions.

Tap on the screen to enter the Wi-Fi password.

Tap on the shift to switch between upper and lowercase characters, and tap on the symbol tab to see more symbols to select.

When complete, select done.

You should see the router mode icons on the top left corner of the parent viewer, which means the baby monitor is in a stable wi-fi connection.

If you see three bars in any of the icons on the parent viewer, the baby monitor is not in router mode.

Please check your Wi-Fi signal and set up the Wi-Fi connection again, to connect the baby monitor in router mode for best connectivity, and always ready for firmware updates.

To update the software, you can go the menu, then go to the general setting tab, select “more”, and choosing software update.
If your software is the latest version, the Parent Viewer will prompt you that it is up to date.
If there is new software available, the parent viewer will ask if you want to install it.
Press Next, and the Parent Viewer will reboot and update.

Now you can enjoy a more enhanced connection. After updating, the connection is set to router mode by default. Using router mode will allow you to receive future software updates when available.

And you can experience smooth video streaming on your parent viewer and the app.

#LeapFrog #setup #LF2936FHD #uk