How to cut different parts of Glass bottles with OAIEGSD Glass Bottle Cutter

Описание: OAIEGSD Glass Bottle Cutter, Glass Cutter for Bottles for Cutting Wine, Beer, Mason Jars, Whiskey, Round, Square and Oval Bottles, Bottle Cutter & Glass Cutter Bundle for DIY Project Crafts
【PRECISE CUTTING】The cutting head of the glass bottle cutter is an ultra-strong diamond carbide blade, 2 cutting heads guaranteed for over 400,000 cuts, double and more durable than other glass cutters. This glass bottle cutter brings a more precise cutting.
【EXQUISITE DESIGN】One of the most appealing features of this glass cutting tool is the adjustable sizing desgin. It includes 5 support wheels, removable backstop and multi-dimension adjustment holes. Easy to adjust length for up to 19.5 inch, perfect for your bottle DIY project.
【STABLE AND SOLID】The rubber non-slip base can keep the glass cutter for bottles stable on the table. The fasteners and pieces are all very secure, so you can make a beautiful, precise cut at your first attempt.
【CREATIVE CRAFTS】You can use this bottle cutter to make various crafts, turn used glass bottles into table lamps, candlesticks, vases, wind chimes or red wine glasses, By your creative recycle ideas and handmade practice, contribute to the protection of the environment.
【COMPLETE BOTTLE CUTTING KIT】You will receive a glass bottle cutter set: 1 glass bottle cutter + 1 instruction + 1 E-book + Video tutorials + 1 spare cutting blade + 1 glass cutter + 6 fixed rubber rings + 2 spare screws + 2 sandpaper + 1 cleaning sponge + 1 pair of gloves + 1 glass drill bit + 1 screwdriver + 1 oil dropper, Every product has been tested strictly to ensure higher quality, if you are not completely satisfied with it, we will give you a full refund.
-----------------------------------------------------------------------------------------------------------------------------
STEPS
1. Select a suitable position for the desired cut then adjust the backstop to fit the bottle
2. Tighten up the backstop
3. Adjust the angle of the cutting head so that the blade is perpendicular to the bottle
4. Rotate the bottle with a medium pressure slowly make sure the cutting line is connected end to end
5. Place 2 suitable rubber rings on both side of the score line
6. Swap the position of cutting head and support wheel
7. Adjust the angle of the cutting head, make sure the blade is perpendicular to the bottle and can lift it up slightly
8. Rotate the bottle with a medium pressure slowly make sure the cutting line is connected end to end
9. Place 2 suitable rubber rings on both side of the score line
10. Adjust the position and angle of the cutting head
11. Rotate the bottle with a medium pressure slowly make sure the cutting line is connected end to end
12. Pour new boiling water between the rubber rings about 20 seconds rotating to completely heat the score line
13. Then switch to cold water (ice water)
14. Pouring it over the score line as you rotate the bottle for about 20 seconds
15. Repeat pouring hot and cold water until it is separated
---------------------------------------------------------------------------------------------------------------------------------
Email: [email protected]
Messenger: https://www.m.me/itrksupply
Twitter：  / itrksupply  
Instagram:   / itisdiycraftideas  
Free product Group:  / amazonreviewdeal  
Bottle ART Group:   / 140392650253166