How to replace the Front Wheel Hub and Bearing 2003-2007 Honda Accord 🚗

Описание: Find the parts used in the video on CarParts.com just there https://carparts.solutions/ACCORD
Over 1 million auto parts at your fingertips, download our app
🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS

⚙️ NEEDED CARPARTS AND PRODUCTS
Wheel Hub : https://carparts.solutions/FrontWheel...

Wheel bearing : https://carparts.solutions/FrontWheel...

ABS sensors : https://carparts.solutions/FrontABSse... and https://carparts.solutions/FrontABSse...

Front brake backing plates : https://carparts.solutions/FrontBrake...

Penetrating oil

Brake cleaner : https://carparts.solutions/BrakeCleaner

Assembly grease

Silicone grease

💪 TIGHTENING TORQUES
Front lower ball joint nut : 58 to 65 Ft-lbs

Upper control arm ball joint nut : 29 to 35 Ft-lbs

Tie rod end holding nut : 33 Ft-lbs

Brake caliper mount bolts : 80 Ft-lbs

ABS Sensor retaining bolt : 86 in-lbs

Wheel hub nut : 134 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Honda Accord :
https://carparts.solutions/ToolBox

List of the tools we used to replace the front wheel hub and wheel bearing on a Honda Accord :
Breaker bar
32mm socket
Hydraulic jack : https://carparts.solutions/FloorJack
Jack stands : https://carparts.solutions/JackStands
Wheel lug wrench
Ratchet
Extender
10mm socket
Wire brush
17mm wrench
Small ratchet
Small flat head screwdriver
Long flat head screwdriver
Fork
Phillips screwdriver
17mm socket
Clamp or iron thread
Flat head screwdriver
Pliers
Ball joint puller
Hammer
14mm socket
Vice
Hydraulic press
Bearing dismantling cup
Circlip pliers
Sandpaper
Socket
Plastic mallet
Torque wrench :
20 to 250 Ft-lbs https://carparts.solutions/TorqueWren...
100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your Honda Accord safely :    • How to jack your Honda Accord safely ? ⬆ 🚗  

How to replace the Front ABS Sensor 2003-2007 Honda Accord :    • How to replace the Front ABS Sensor 2003-2...  

⚠️ CARPARTS.COM'S INFOS
We recommend loosening the nut on the end of the transmission once the vehicle is on the ground. If your vehicle is equipped with aluminum rims, you will need to remove the wheel first before you can remove the central rim cover.

When you change your wheel hub or your wheel bearing, we recommend that you also change your brake backing plate.

Don't forget to remove the cable that you used to hold the caliper assembly together.

We recommend replacing the hub nut with a new one.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:11 Loosen the wheel hub nut
0:31 How to lift your Honda Accord
1:09 Remove the ABS sensor
3:17 Remove the wheel hub nut and front brake hose
3:36 Remove the brake system
4:24 Remove the outer tie rod
4:59 Remove the control arms ball joints
6:05 Remove the wheel knuckle
6:21 Remove the wheel bearing
8:04 Why you should also replace the brake backing plate
8:26 Put the backing plate back
8:39 Put the wheel bearing back
10:05 Put the wheel hub back
10:49 Put the ABS Sensor back
11:06 Put the wheel knuckle back + tightening torques
12:36 Put the outer tie rod back + tightening torques
13:20 Put the brake system back + tightening torques
13:57 Put the brake hose + hub nut back
14:15 Reconnect the ABS sensor
14:55 Put your Honda Accord on the ground
15:10 Tighten the hub nut + tightening torque