etrailer | A Closer Look at the Taylor Made Big B Through-Hole Boat Fender for 25' to 35' Long Boats

Описание: Click for more info and reviews of this Taylor Made Boat Bumpers:
https://www.etrailer.com/Boat-Bumpers...
Check out some similar Boat Bumpers options:
https://www.etrailer.com/dept-pg-Boat...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Tayl...
Ellen: Hey everyone. I'm Ellen here at etrailer.com, and we're going to be taking a look at the Big B boat fender. This is going to be from Taylor Made, and it's going to help to provide some cushion and protection for your boat whenever you're docking. It also gives you protection from any kind of pilings and other boats, so that you don't have to worry about dents, dings, scratches, stuff like that.The nice thing about it is that it is going to be an easy to inflate design, has a nice heavy duty vinyl construction, and you could mount this horizontally, like so, or you can also traditionally mount it vertically, if you want to. It does have ribs on the outside to help it keep from rolling along the outside of your boat. It's going to help to grip the side of that boat and keep it in place.So you can take a little closer look at it, you can see it kind of has a metallic navy blue sheen to it.

It sort of almost looks like an automotive navy blue, with kind of that flecks of metal in it, that looks pretty shiny and pretty. We'll have the center hole there, we can run our cord or line through to mount it in place. It is going to be pretty easy to inflate. There's going to be an inflation port here at one end. So you can use a compressor, a hand pump, bike pumps, something like that, to inflate it fully.

It does have a PSI, or an inflation pressure rating, of two PSI. So not too much pressure, but enough to keep it afloat. The nice thing about it being meant to mount in that horizontal position. So that's going to make it great for those areas where the tides are going to change quickly, so it'll match up with the level of the water, and also help in those awkward spots where a vertical fender might not work as well.The vinyl is made out of a Marine grade construction, no islets, as you can see, on either end. So nothing to tear off.

It's just going to be those flat ends on either side. This is going to work out well for boats that are 25 feet to 35 feet long. And the actual fender itself is 20 inches long and eight inches in diameter, when fully inflated. The center tube has a diameter of three quarters of an inch, and it can accept up to a five eighths of an inch diameter rope. It's covered by a limited lifetime warranty, and it is made in the USA.And that's really about all there is to talk about with the Big B inflatable fender.

I hope this video is helpful in deciding if this is the right piece for you. We do have a lot of other accessories here at etrailer.com to outfit your boat to whatever specs you might have. So check them out. Thanks for watching, and we'll see you next time.