Jenbacher Gas Generator | Changing Power Set Point On Synchronous Mode

Описание: Performing Jenbacher Gas Engine | Changing Power set point on Synchronous Generator on Synchronous mode from Control Panel DIE.NE.

In this tutorial we will learn how we can change power setting on synchronous mode in jenbacher engine.
If you would like to set the required power or to reset any alarm you have to be logged in.
First of all switch to user in the bottom right corner of the dynaxdx4 in the new screen.
Choose your local user and enter the customer code followed by the enter button verify that you are logged in by checking if the footer is showing customer and simple view.
Here you can see the engine is already running in mains parallel mode to adjust the power output tap on main and start stop.
In the upper area of screen you will see the power set input field if you are logged in it will be shown with a white background then you can tap on the field and change the value within the valid range.
After the confirmation the engine will ramp up or down to the desired power.



Contact us for details for Jenbacher Generator and spares.
Contact Via Email: [email protected]
Contact Via Whatsapp: +1(619)354-4752
Like and follow our social media pages to get regular update and happenings.
Like us on Facebook: http://www.facebook.com/bespak
Like us on Instagram: https://www.instagram.com/burraqengpak
Like us on Twitter: https://twitter.com/burraqengg





















BES-PK,#burraqenggpk,#jenbacher,#gasengine