AutoSlide Programming your V1 RFID Smart Tag Set
Автор: Autoslide LLC
Загружено: 2023-03-12
Просмотров: 1138
Описание:
PLEASE NOTE: This ONLY applies to VERSION 1 RFID K9/Smart Tag Sets. V1 sets were discontinued around November 2021. If you're uncertain which version you have, please contact us directly.
Here's a video on programming your V1 RFID/Smart Tag Sets to your unit.
At 1:20 David starts discussing the unit and set up, and at 1:54 David goes through Pet Mode set up.
Each RFID Set can handle a maximum limit of three tags at once.
The unit used in this video is upside down, AKA floor level, for testing purposes.
If your dog lays down in front of the door often then we recommend positioning the RFID Sensor high enough so that the sensor will only be triggered when the dog is standing up.
You can program your desired distance for your sensor via the tags. For your tags to open the door from three feet away, hold the button down on the tag until the blue light flashes once. For six feet, do the same thing but hold the button on the tag down for two flashes. For ten seconds, hold the button down for three flashes.
-One Flash = 3 Feet
-Two Flash = 6 Feet
-Three Flash = 10 Feet
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
