Replace Automatic Sliding Door Cable in 3rd Generation Honda Odyssey

Описание: Watch me remove the tail light, the door rail cover, and the inside trim to replace a broken cable on an automatic sliding door in a 3rd generation Honda Odyssey (2005, 2006, 2007, 2008, 2009, 2010).

You can now buy premade cables with everything you need here: https://carcableguy.com/carcableguy_m...

Written instructions are here (READ THIS!!!!): https://www.gabeshacks.com/2018/01/au...

I'm sorry about this video. The quality is terrible on so many levels. But I wasn't planning to do this, and I was trying to get it done as quickly as possible while recording it.

Here's the write up (and video) for this job on the 2nd gen Odyssey, as it may add some insight: https://www.odyclub.com/forums/24-199...

If this has helped you, please consider donating. Any amount is helpful.
Donate: https://paypal.me/gabeluci

Parts needed:

Cable with 1/16" outer diameter, about 12ft per side (maybe Home Depot, or online)
US (aircraft cable): https://amzn.to/2gAC9Vo
Canada: harder to find aircraft cable, so try bike cable: https://amzn.to/3AE4zGi

Ferrule and stop set (locally, or online)
US: https://amzn.to/2gNrhXm
Canada: https://amzn.to/2oZEelm

Terminal lug, which needs to be ground down (Home Depot, or online)
US: https://amzn.to/2gwJrvW
Canada: try an electrical supplier, or if you're using bike brake cable, you may not need this

Note: All links are affiliate links, meaning that when you use these links, I get a percentage of anything you spend, at no cost to you.