Step-by-Step Installation of an Automatic Chlorine and pH Control System

Описание: Welcome to our channel! In this video, we will guide you through each step to install an automatic chlorine and pH control system in your pool. This system, which utilizes various products from Hidroten, will help you maintain your chlorine and pH levels automatically in optimal conditions. Be sure to carefully follow each step to achieve a successful installation.

We will start by removing the section of piping where the ELECTRODES HOLDER SIGHT GLASS SNS© TEE will be located, which uses the Netvitc System® connection system. Then, we will insert the PROBE CONNECTION and the INJECTION CHECK VALVE into the electrodes holder, using the included O-rings to ensure a tight seal. We will continue by removing another section of piping for the electrolysis cell, adding the necessary PVC-U valves and accessories. Next, we will install the control unit and the peristaltic pump and connect the probes appropriately. Finally, we will insert the tube into the pH reducing liquid reservoir and into the peristaltic pump. Follow these detailed steps to achieve a successful installation of your automatic chlorine and pH control system.

We list the essential Hidroten products for the automatic chlorine and pH control system, including:

Electrodes holder sight glass SNS© tee
Injection check valve
Probe connection
PVC-U pressure fittings
Zaspin Mecanic Pipe Clips

If you have any questions or need additional assistance, please do not hesitate to contact Hidroten, S.A. at [email protected] or by calling +34 965 11 42 82. We are here to help!

Hidroten, S.A.
[email protected]
+34 965 11 42 82
https://hidroten.com

Don't forget to hit the like button on this video, subscribe to our channel, and enable notifications for more useful content related to water treatment systems and pools. Thank you for your support!

#swimmingpool #watertreatmentequipment #probe #checkvalve