Easy method to set timing on Old Bullet | Royal Enfield 0.8mm BTDC
Автор: BULLETO DIY
Загружено: 2021-05-31
Просмотров: 107607
Описание:
Hi guys, the above video is all about setting perfect spark time on a Royal Enfield Bullet 350.
Steps to be followed
1. Set the Points gap to 0.4mm at highest opening
2. At compression mode identify the TDC, Set the piston position to 0.8mm BTDC by rotation the wheel forward and backward on 4th gear.
3. Turn the points plate and stop at the position when it starts opening (paper gap), this can be identified by taking ammeter as reference, the needle returns back to Centre when points starts opening.
Note: Handle the scale with care, make sure it wont fall inside the cylinder. To be safer, you can tie the scale with some string by drilling a hole on it.
Regards,
Bulleto
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
