ToxiRAE 3 H2S - How to Manually Calibrate: Expert Tips
Автор: Frontline Safety UK Ltd
Загружено: 2015-07-30
Просмотров: 11081
Описание:
http://www.frontline-safety.co.uk/blo... - read our blog post on the subject.
Follow us on Twitter - / frontl1nesafety
Follow us on LinkedIn -
http://linkd.in/1AhA3vA
Here’s how it’s done:
press and hold both buttons for 3 seconds
enter the unit’s passcode. The default is 111
hold down the “On” key
the unit will ask if you wish to perform a “Zero Cal”, press the “Y” key to accept
once the unit has reset all the sensors, press the “Y” again to perform the span calibration
confirm that the test gas matches the value on the screen
apply the calibration adaptor the sensor
switch on the gas
It only takes 60 seconds to complete the calibration, now all you need to do is navigate back to measure mode and the unit is ready to go.
Please refer to your monitor manual and previous calibration certificates to ensure you have the correct target gas mixture.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
