How to make RC F-16 JET 70mm EDF & FLY

Описание: Don't forget to LIKE and SUBSCRIBE to support the channel!

DONATE: https://paypal.me/KristjanKralj2023

SUBSCRIBE TO @JuliusPerdana THANKS:)

⬇️ DON'T FORGET ABOUT ⬇️
╔═╦╗╔╦╗╔═╦╦═╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╚╝╩═╩═╝
================================================= =============================
You can download the plans from the link below:
A4 plans: https://paper-replika.com/RCplans/PR-...
A0 plans: https://paper-replika.com/RCplans/PR-...
A3 sticker: https://paper-replika.com/RCplans/F-1...
================================================= =============================
find me at:
instagram   / kristjankralj  
tiktok   / kristjankralj60  
================================================= =============================
Specifications:
1. Wingspan 1120 mm,
2. Flying weight: 1910 grams,
3. Wing load: 54.6 grams,
4. Wing cube load: 9.2
5. Wing area: 35 dm2 / 543 sq.in.
6. CG: center of gravity - 28.5 cm from the rear edge

electronics
FMS 70 mm 12 blades EDF
80A ESC
Lipo battery 3S 2200mah 70-95C X2 or 6S 3300mah 35C
5 x 9 gram servomotors with metal gears,
45mm, 65mm foam wheels
servoless folding chassis

Materials:
1. 5 mm foam board/depron,
2. 3 mm + 9 mm plywood,
3. 0.5 mm plastic,
4. hot glue, UHU glue, CA glue.

Tools:
1. Hot glue gun.

playlist:
00:00 introduction
00:09 building and inserting electronics
22:40 coloring
23:21 stickers
24:30 firt trys
28:39 first successful flight
29:29 outro