PROA7PLUS: Configuring Apple HomeKit

Описание: In this video, Dylan from Alarm Grid will show you how to enable and pair a PROA7PLUS with Apple HomeKit. In order to work with Home Kit, the panel must have access to WIFI. The PROA7PLUS and PROA7PLUSC come with a PROWIFIZW installed from the factory.

00:00 - Introduction
00:46 - Enable HomeKit in Panel
01:58 - Reset HomeKit (Default)
02:44 - Pair with HomeKit
02:57 - Get Panel QR Code
04:22 - Using HomeKit (Arm/Disarm)
05:40 - Closing

To verify that the panel is on a firmware version that supports HomeKit, you can go to: Menu, scroll down to Tools, Enter Installer Code (4112 is default), Programming, Advanced Settings. Scroll down to the bottom of the page and ensure the "Enable HomeKit" line item is toggled on. Use the back arrow at the upper left of the screen to back out of programming. If you don't see the option to Enable HomeKit, you need to firmware update the panel. If you're not sure how to do that, contact your alarm dealer.

Next, we recommend that you reset HomeKit. Even if you haven't used it before with the panel. This will help to prevent possible issues moving forward. From the home screen, click the Menu icon, then scroll down to Settings, Apple HomeKit, then enter the Installer Code or Master Code (default is 1234). Tap "Reset HomeKit" then tap "Continue." Once the reset is complete, you'll remain on the Apple HomeKit screen of the panel.

Begin the pairing process on the iOS device you'll be using. From within the Home app, tap "+ Add Accessory". On the panel, tap "Pair Controller to HomeKit". The panel will produce a QR code. Scan this using the camera on your iOS device. Once the QR code has been scanned, the iOS device will walk you through adding the panel and each compatible zone (life-safety zones are not compatible with HomeKit and will not show up.) You can edit device names and choose appropriate icons for each device within HomeKit. Once you're finished, click "Done" on the iOS device. You're now ready to begin using your PROA7PLUS or PROA7PLUSC with HomeKit.

https://www.alarmgrid.com/faq/how-can...

http://alrm.gd/get-monitored