🔧 Ford Focus 2013 Transmission Learning - Ford Powershift DPS6 - Aprendizaje

Описание: 🔧 Ford Focus 2013 Transmission Learning
Learning a Ford Focus clutch. Necessary for proper operation.

*Video Title:* Ford Powershift DPS6 Transmission Calibration and Learning Process

*Informative Document:*

This video details the calibration and learning process for a Ford Powershift DPS6 transmission, specifically for a 2013 Ford Focus. The procedure involves using a diagnostic tool to communicate with the car's computer system and properly adjust various transmission components.

*Key Steps in the Calibration and Learning Process:*

*Initial Setup:* The video begins by connecting the diagnostic tool to the vehicle. The technician navigates through the tool's menus to access the transmission control module.
*Transmission Range Sensor Calibration:* This is a key step involving the calibration of the **transmission range sensor**, which is the sensor that detects the position of the gearshift lever.
The technician begins by placing the gearshift lever in park and then communicating this position to the computer.
The lever is moved through the different positions (reverse, neutral, and drive), with the technician confirming each position to the computer.
The computer records the sensor values ​​for each of these positions.
The diagnostic tool displays the values ​​for each gear.
*Verification:* After calibration, the tool verifies the stored range sensor values.
The technician tests the gear positions to ensure they are within the correct range.
If a gear position is out of range, the system identifies it.
The technician verifies that the transmission shifts gears correctly.
This step includes moving the gearshift lever between gears to confirm proper sensor operation.
*Clutch Adjustment:* The video also includes clutch adjustment. The clutch adjustment process is also performed using the diagnostic tool.
The technician indicates that the clutches were adjusted, and that the process was aborted once due to an error involving accelerating at the wrong time.
The correct method involves pressing the accelerator pedal fully only once and then holding it steady while the computer adjusts the clutches.
The system will not proceed if electrical loads such as the radio or air conditioning are on, or if there are engine misfires or electrical problems such as faulty spark plugs.
The computer calibrates the transmission; this step may take several minutes.
During the process, the car makes noises while the transmission is being adjusted.
*Final Road Test:* After programming the transmission, a road test is required.
The technician and an assistant take the vehicle for a spin to test the transmission's shifting.
During the road test, the diagnostic tool is used to verify that the transmission is functioning properly when shifting through all gears.
The transmission is shown shifting smoothly.
*Grounding Problems:* The video mentions that one of the problems with these vehicles is that the electrical ground connections are often attached to painted surfaces, and that the paint from under the connections must be removed.
The technician states that the vehicle's ground points need to be cleaned and improved to ensure good electrical connections for the actuators.
The technician states that he was informed of this problem at several transmission seminars.

*Important Points:*

This procedure is necessary when replacing parts in the transmission or if the vehicle is not shifting properly.
The procedure involves the use of specialized diagnostic equipment.
Attention to detail is essential, as certain steps require specific actions and conditions to be met.
Grounding problems can cause problems with the transmission's operation.

*Tags:*
Ford, Powershift, DPS6, Transmission, Calibration, Learn, Automatic Transmission, Repair, Automotive, Diagnostics, Scan Tool, Range Sensor, Clutch, Gearbox, Ford Focus

*Hashtags:*
#Ford #Powershift #DPS6 #TransmissionRepair #AutomotiveRepair #CarMechanic #TransmissionLearning #FordFocus #Automotive #DIYCarRepair