ARRMA Outcast 8S V2 EXB Gets M2C Overkill Shafts – Built for WAR! 🔥

Описание: 🔥 ARRMA Outcast 8S V2 EXB Gets M2C Overkill Shafts – Built for WAR! 🔥
Hey guys, welcome back to ChriswithaC RC — the place where we take RC trucks to their absolute limits and see just how much punishment they can handle.
Today’s episode is special, because we’ve got a game-changing upgrade courtesy of the legends over at M2C Racing. Massive thanks to Avery and the crew for sponsoring this video and always supporting the RC bashing community. 🙌

If you’ve been following the channel, you already know my ARRMA Outcast 8S V2 EXB RTR — aka the Black Widow — has gone through some serious upgrades to get it as close to bomb-proof as possible. Heavy-duty chassis bracing, upgraded electronics, beefed-up suspension… we’ve done it all. But every rig has a weak point.

💥 The Weak Link – Stock Driveshafts
A few videos back, we took the Outcast 8S to Penallta, in the heart of the Welsh Valleys — home to Sultan the Pit Pony, the iconic landscape sculpture. We went big… maybe too big. The truck landed perfectly on its wheels, but with a brutal side impact. That’s when the weak point showed itself:
The stock driveshafts bent. Easily.

Honestly, for a truck built for 8S bashing, the stock shafts just aren’t up to extreme side-load landings. And that’s where today’s upgrade comes in.

🛠 Enter the M2C Overkill Shafts (M2C310926C)
After seeing that Penallta video, Avery from M2C messaged me and said:
"Chris, I’ve got just the thing for you. You won’t bend these."

What he sent is nothing short of insane: M2C Racing ARRMA 8S Overkill CVD Outdrive Driveshafts — the largest driveshafts you can physically fit in an ARRMA 8S platform without modifications.

Specs that matter:

REV C version – now with removable pins for easier maintenance

Center shaft diameter: 8.12mm

End diameter: 7.11mm

Hardened 4140 alloy steel construction for extreme strength

Designed specifically for extreme bashing and high-impact landings

Distance between pin centers: 181mm

If you’ve ever looked at your stock shafts next to these… it’s like comparing a drinking straw to a scaffold pole.

⚙ Kit Contents
When you order these, you get:

2x M2C310926C Overkill Outdrive Shafts

4x M2C310927FLAT Cross Pins

4x M4 Set Screws
Plus, M2C’s 50% off replacement warranty up to 3 times — a big deal in the bashing world.

⚠ Before You Buy – Setup Warnings
These aren’t a drop-in and forget part for everyone. If you run them wrong, you will break something else instead.

Droop Settings: Adjust so the axle isn’t in a bind when wheels are fully extended or fully compressed.

RPM Arms: Not recommended. They flex more than stock and don’t allow droop adjustments — a recipe for binding.

Landing Technique: Avoid landing on throttle — no driveshaft in the world survives constant shock loads under torque.

M2C even recommends using limiting straps, droop screws, or small fuel tubing inside shocks to control travel and avoid binding.

📹 In This Video You’ll See:
Unboxing the M2C Overkill CVD Driveshafts — full close-up shots so you can see the insane size difference compared to stock.

Installation Walkthrough — tips, torque settings, and common mistakes to avoid.

Setup Adjustments — how I dial in droop, check for bind, and prepare the truck for abuse.

Bash Test at Dusty 2.0 — the Black Widow gets sent big to see if these shafts can survive what bent the stock ones.

📦 Where to Get Them
You can grab your own M2C Overkill Shafts (M2C310926C) from:
[Insert affiliate/product link here]
(Using these links helps support the channel at no extra cost to you — thanks legends! 🙏)

❤️ Support the Channel & Join the Community
☕ Buy me a coffee: https://buymeacoffee.com/chriswithacrc
Every donation goes back into making more epic RC content — more upgrades, more bashes, more carnage!

This channel isn’t just about RC trucks — it’s about community.
I’m beyond grateful for every like, comment, and subscriber. You guys motivate me to keep building, sending, and sharing my passion for RC every single week.

So grab a brew, sit back, and watch the Outcast 8S go to WAR with its new M2C armor.

CONNECT WITH ME!
===============================

👥 - FACEBOOK:   / chriswithac.rc  
🎵 - TICKTOCK :   / chriswithacrc  
🐦 - TWITTER: / chrisle77678330
📸 - Facebook Group ( RC BUDDYS V2) :   / 1367432597469743  

==============================

Stay awesome,
ChriswithaC RC 🚀

#ARRMA #ARRMAOutcast8S #ARRMAEXB #M2CRacing #RCBashing #RCBash #RCTruck #ARRMAKraton8S #ARRMAUpgrades #ExtremeRC #RCAddict #ARRMAEXBUpgrade #RCBashSession #RCJump #ARRMA8S #BashProof #RC4Life #ARRMAOverkill #ChriswithaCRC #fun