Our Monster Megabore Lathe Gets Put to Work! | CAT 777F Hub Repair
Автор: Cutting Edge Engineering Australia
Загружено: 2026-11-05
Просмотров: 1899449
Описание:
Our monster Megabore lathe is taking on a huge CAT 777F mining haul truck wheel hub that's suffered some costly wear, all because the wheel nuts weren't tightened properly! We've got worn wheel stud holes and damage to the mounting flange to repair, and while the work might seem straightforward, getting everything back to the correct tolerances is critical, with very little room for error!
We start by setting the hub up on the Hafco radial arm drill to drill and ream the damaged stud holes, before moving over to the TM-1740G lathe to machine a set of new sleeves. Each sleeve needs to be drilled, bored, reamed and turned to size for an interference fit, with the crush carefully calculated so the finished holes are the correct size once the sleeves are pressed into place. Too loose and the studs won't fit securely, too tight and they won't fit at all!
Once the sleeves are pressed into the hub using our pneumatic porta power, it's time to get the Monster Megabore lathe into action! We set up the huge wheel hub on our Megabore ESP Machturn to machine the worn mounting flange and restore a clean, flat surface. But there's an important limit to how much material we can remove, so we need to clean up the wear without taking too much off and compromising the strength of the hub.
There's a lot more involved in this repair than you might expect, with plenty of drilling, boring, reaming, turning and machining across three different machines. It's also a great opportunity to see our monster Megabore tackling a customer job and just how much easier it makes handling and machining components of this size!
═══════════════
New videos every second Friday at 5pm AEST! If you enjoy the video, smash LIKE & SUBSCRIBE 👉 / @cuttingedgeengineering
❤ PATREON (early access & ad-free videos): / cuttingedgeengineering
🧢 OFFICIAL CEE MERCH: https://www.ceeshop.com.au
🛒 OUR AMAZON STORE (workshop favourites): https://www.amazon.com/shop/cuttinged...
(As an Amazon Associate we earn from qualifying purchases.)
FOLLOW US
🎵 TikTok: / cutting_edge_engineering
📸 Instagram: / cutting_edge_engineering
👍 Facebook: / cuttingedgeengineeringaustralia
ABOUT US
We're a down-to-earth, real-life machining and fabrication workshop on the Gold Coast, Australia. We specialise in helping mining and earthmoving businesses keep their machines running smoothly, and we love working on broken parts, the bigger the better! As well as our customer repair work, we also share the big workshop projects, restorations and custom shop-made tools we get stuck into, like the Franna crane project and our heavy duty parts washer build. New video every second Friday. Subscribe to follow along.
#CuttingEdgeEngineering #MegaboreLathe #Machining #HeavyEquipmentRepair
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: