Connecting Multiple Mighty Dwarf® Speakers to a Sound Source

Описание: Official Online Stores visit: http://www.mightydwarf.com/retail-loc...

For retail dealer and distribution inquiries contact [email protected]

We are often asked if you can connect more than one speaker together to produce MORE sound :-) The answer is YES. Here is how you do it...
1. You need to purchase an audio output splitter (Coming soon to MightyDwarf.com)
2. Connect the 3.5 mm earphone jack to the sound source. In the video it is the phone.
3. Connect the "female" ends of the splitter to the "male" ends of the two Mighty Dwarf audio cables.
4. REMOVE THE PAPER FROM THE GEL PADS OF THE SPEAKERS! This will improve the sound quality produced by the speakers.
5. Turn on the speakers and separate them on the surface you are using as the resonant sound board (the thing you are using to make the noise...the table in the video)
6. Turn on the sound source and adjust the volume from the sound source (phone)

The paper is used to protect the gel pad from contamination or damage during transportation but should be removed when the speaker is in use. THE ONLY TIME THE PAPER SHOULD BE KEPT IN PLACE WHEN THE SPEAKER IS BEING USED IS WHEN YOU ARE USING A MOUNT - GLASS MOUNT OR POROUS SURFACE MOUNT.

The Mighty Dwarf™ is the world's most innovative acoustic speaker that allows virtually any surface to play amazing music. You do not need to know anything about technology but you will be amazed at HOW it works. The vibration resonance technology enables the Mighty Dwarf to create a speaker without the use of a membrane. Audio waves are transmitted from the Mighty Dwarf onto any solid surface turning that surface into a large speaker boasting full sound in 360 degree clarity.

  / mightydwarf  

http://www.lavaimports.com/Flyers/5W_...