FYSETC Voron 0.2 R1 Pro v1.1 - Part 11

Описание: In this part ,
Finally completed the Top hat, and get an initial power on. Ad call it done!

The setup of Klipper, some basic starting calibrations ( eg: PID for bed and nozzle, 3 point manual bed level, etc ) , will be in a new post that will be new video and not part of this playlist.

I will list all of STLS at the end to include ALL parts that were not directly from the FYSETC GitHub If you wish to use them as well you can do so. Link for FYSETC GitHub STLs included.

This was an AMAZING experience. So many things learned as well.
I highly recommend it!

Setup, calibration, and printing, will be in a separate video.


First I'd like to thank FYSETC ( ‎@fysetc4882 ) for giving me this kit free to build. It's my 1st Voron build so I will likely take longer than others that may have shown this build. But I feel this will not only show how it's built, but also maybe highlight the little quirks I found along the way.

As most kits refer you to the Official Voron Design build guides , there are sometimes things in the kit that aren't part of the guide. You'll see what I mean as you watch them. I had been asked if I wanted the pre-printed parts as well, but I wanted to experience the FULL Voron building experience which includes making your own printed parts.

This in itself takes time and I do suggest don't rush it. Printing at a slower speed will also improve part strength.

Otherwise this is a completely stock as it comes build. ( Not going to say I'm not going to likely do a few upgrades later though 😉 feel free to comment if you can think of any I might find fun and I might do them in future videos showing those mods )

Also please be kind. I don't have a professional studio , with HIGH Quality, Noise cancelling audio equipment and fancy cameras. All footage done was with my ‎‎Samsung Galaxy S23 Ultra and a simple tripod, using my Galaxy Buds 2 Pro as microphones as they do have active noise cancelling but I found they sometimes don't apply it for things like this. #HobbyistBudget

Anyway I do hope you find these Videos Useful whether you are building this kit, self sourcing, or just like watching someone make a printer.

Yes to answer early. I did make a few Mistakes. I considered editing them out as I did want to look foolish, however after reflection, I realised they were simple mistakes that anyone might make trying to do this on their own. Feel free to post a laugh in the comments and your thoughts on the many goofs I did ( other than the requirements of a MUCH larger area to work which I am Very well aware I need but just don't have at this time )

Mentions and attributions:
FYSETC Voron 0.2 R1 Pro V1.1 Kit: https://a.aliexpress.com/_EGIBKMG

‎@voron_design for making such great open source printers for us to build.

‎@mintion for Heated Insert toolkit ( bought myself on Amazon)

‎‎@bigtreetech5117 and ‎‎@fysetc4882 for the Belt Tension tools ( 1 won, and one I bought )

‎‎@BallisticTech and ‎‎@SteveBuilds where I found some of the small things I hadn't realised when building this kit.

STL Links:

FYSETC GitHub for STLs
https://github.com/FYSETC/FYSETC-Voro...

FT 1515 Extrusion alignment tool:
Helpful in aligning the blind joints building the extrusion.
https://www.printables.com/model/5725...

Voron 0.2 Measurement tool:
https://www.printables.com/model/7701...

HEX Handle for Voron V0 V0.1, V0.2
Used as is.
https://www.printables.com/model/4497...

Voron 0.2 V0.2 Skirt Set Mesh Only
just glue with to the back of each of the FYSETC GitHub provided skirts and trim the slots for screws that bolt together as needed.
https://www.printables.com/model/3696...

Voron V0 Display (V0, V0.1, V0.2) Display Knob MMU, Dual Colour
Used as is.
https://www.printables.com/model/4354...

Voron display spacer
https://github.com/VoronDesign/Voron-...

Voron 0.2 V0.2 MMU Mains Inlet Foot
Used as is
https://www.printables.com/model/3645...

Voron V0.2 - Display Faceplate - Multi-body
although I can see where some may need to use XY compensation a little. Or separate the 2nd colour and merge in slicer with original fysetc GitHub stl.
https://www.printables.com/model/3653...

Mini SB Voron 0.2 R1 V1.1 - Slide Swipe Probe & Hex Pattern
Used this but without intent to use the probe as it had the identical cut outs that fysetc made for the neopixels on the part cooler ducts. I just liked the aesthetics.
https://www.printables.com/model/9952...

#3dprint #3dprinter #3dprintingtechnology #3dprintinguk #fysetc #voron #vorondesign #little3dprinter #voron3dprinter #polymaker