Audi TT Mk1 3.2 V6 - How to remove the Engine Undertray

Описание: Subscribe for more TT content: https://www.youtube.com/andycharger?s...

If you need to change the oil on an Audi TT mk1 3.2 you need to remove the engine undertray (or remove an engine splash shield as it is sometimes called) to access it. However there are lots of different bolts holding this 2 piece tray in place. They include 10mm bolts, M14 Spline Bolts, T45 Torx Bolts and T20 Torx Bolts.
Its also much heavier than the 180 and 225 plastic undertray as this is mainly metal.

I often get asked is a v6 under tray different to a 1.8?

So this how to guide for removing an engine undertray on an Audi TT 3.2 V6 should help you.

This is a full guide to installing engine under tray V6.

I have a whole host of videos on fixes for the Audi TT mk1 3.2 V6. Why not check these out:
Changing front brake pads on 3.2 V6:    • Audi TT 3.2 Mk1 - How to change front brak...  
Changing the oil pressure sensor on 3.2 V6 :    • Audi TT mk1 8N 3.2 V6 - How to replace the...  



Remember to use a trolley jack to take some of the weight as you dont want it falling on you.

So if you have any questions on Audi tt Undertray removal or Audi TT undertray fixings on any other questions, please ask!
#audi8n #undertray #engine