Repairing a wooden chair by syringing glue into the loose joints

Описание: Broken chair & some of the joints are loose but i didn't want to take it apart, i might have caused more damage & created more work for myself, I syringed glue into the joints through a hole i made at the joint, another hole above which could be made smaller allows the air out & release pressure created by the syringing, this chair would prob look nice with a full strip & lacquer but all the bumps n knocks are part of the chair's history.
I found out after i posted this vid that it was a Scandart Lounge Chair, I googled that & found it was worth a bit more than the crappy old chair i first thought,, if I'd known before i would have fixed it in the same way but would have been a bit more careful & drilled a smaller hole when i put one in the top of the arm, it was only to let the air out so the glue would go in.

I don't make these videos to make money, I make them to share the tips I've learnt over 36yrs as a joiner, but filming, editing, exporting, reviewing & uploading does take a lot of time so if you have gained anything from any of videos & would like to help me out & donate pls click the PayPal link below, every little helps & will be much appreciated. Thankyou.
https://www.paypal.com/cgi-bin/webscr...

All videos
   • Плейлист  
Staircase bullnose repair Pt1
   • Staircase bullnose repair Pt1  
Spraying the mantle shelf
   • Spraying the mantle shelf, The whole proce...  
Spraying both sides of a plank in one session
   • Spraying both sides of a plank in one session  
Wardrobe build pt1 - Cutting the plywood carcass & no10 biscuits
   • Wardrobe build pt1 - Cutting the plywood c...  
Alcove cupboards pt1 - Making the doors & front frame
   • Alcove cupboards Build Pt1 - Making the do...  
Cutting keyhole slots for a mantle piece with a router
   • Cutting keyhole slots for a mantle piece w...  
How to fit hollow wall anchors with a Fischer Setting Tool
   • How to fit hollow wall anchors with a Fisc...  
Building a Summerhouse/Deck Base Frame
   • Building a Summerhouse/Deck Base Frame wit...  
Making doors with a Festool Domino DF700
   • Making Shaker Style Cabinet doors with a F...  
Cyclone dust shavings collector quick & simple, without Thien baffle
   • Cyclone dust shavings collector quick & si...  
Sandaper, What do i use & a little tip for using it
   • Sandpaper, What do i use & a little tip fo...  
Spraying Paint, How much Will One 500ml Cupful Cover
   • Spraying Paint, How much Will One 500ml Cu...  
Cutting keyhole slots for a mantle piece with a router
   • Cutting keyhole slots for a mantle piece w...