How to Replace Front Brakes 2009-2015 Honda Pilot

Описание: Buy Now!
New Brake Rotor Set from 1AAuto.com http://1aau.to/ia/1ABFS04058
New Brake Pads from 1AAuto.com http://1aau.to/ic/1ABPS02835
New Brake Rotor Set from 1AAuto.com http://1aau.to/ia/1APBR00992
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ib/1APBS00442

This video shows you how to install front brake pads and rotors on your 2009-2015 Honda Pilot. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2011 Honda Pilot EX 3.5L Sport Utility 4-Door and the process should be similar on the following vehicles:
2009 Honda Pilot
2010 Honda Pilot
2011 Honda Pilot
2012 Honda Pilot
2013 Honda Pilot
2014 Honda Pilot
2015 Honda Pilot

Tools you will need:
• Flat Blade Screwdriver
• Phillips Head Screwdriver
• Pry Bar http://1aau.to/oGU/1AXAA00020
• 10mm Wrench
• 10mm Socket
• 17mm Socket
• 19mm Socket
• Brake Caliper Compressor Tool. Dual Piston. Pump Style.
• Brake Caliper Hanger http://1aau.to/odD/1AXAA00439
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Driver
• Torque Wrench http://1aau.to/oaij/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves http://1aau.to/ou3/1AXSS00048
• Safety Glasses
• Rubber Mallet
• Wire Brush http://1aau.to/opf/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Honda Pilot 2nd Generation 2009-2015:    • Honda Pilot 2nd Generation 2009-2015  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.