I Replaced My Radiator Without Removing The Fan !!!! 2008 Toyota Sequoia SR5 5.7L V8 2WD

Описание: How to replace the radiator on a Toyota Sequoia and Tundra without removing the protective shroud and without removing the fan.
How difficult is it to remove the fan? Very difficult and you need a special fan clutch holding tool.

This is the radiator I purchased from O'Reilly Auto Parts:
Murray Heat Transfer Radiator
Part #: 8012994


Information about the fan:
A fan clutch is a thermostatic engine cooling fan that can freewheel at low temperatures when cooling is not needed, allowing the engine to warm up faster, relieving unnecessary load on the engine. As temperatures increase, the clutch engages so that the fan is driven by engine power and moves air to cool

Some people use this tool:
SCHLEY PRODUCTS Universal Fan Clutch Wrench SL61600
Specially designed contoured water pump holder is easy to use on vehicles using bolt on water pump pulleys to remove and replace the viscous fan clutch.
No adjusting or fiddling simply, with only one hand, hook on the pulley bolt and hold to remove the fan clutch. Reverse the 61600 to install the fan clutch. Designed for the following applications:
Chrysler, Ford, GM, Land Rover, Mazda with bolted on water pump pulleys.
Ford 4.9L 6 Cylinder F Series pickup trucks '93-'96 and Econo-line vans '92-'96.
Audi 1996 and later (except Audi A6 2.8L)
BMW 3, 5, 6, 7, 8, X & Z series (except the 4.0L & 4.4L V-8 engines).
VW 1998 and later (except Passat 3.0L 1998 and later) with bolted on water pump pulleys.

Mr. Daniel Explains















2020 06 18 proof that you can replace your own radiator.
V8 SUV same as Tundra second generation sequoia overheating and losing coolant problem because of a leaking radiator hose and cracked plastic radiator with a direct fit replacement premium aluminum core