How to install tripod turnstile - MairsTurnstile.com

Описание: The installation of tripod turnstile gate is mainly divided into the following steps:
1.Formulate construction solution
2.Preparation before installation
3.Fixed adjustment of tripod turnstile
4.Installing a ground wire
For more details, please check:
https://mairsturnstile.com/tripod-tur...
The previous preparation steps may be somewhat different due to different environments and sites. Please complete them according to your actual situation. The most important parts about the specific installation are fixed adjustment and wiring of the tripod turnstile gate. If you purchased our tripod turnstile gate, you can fully refer to the installation and wiring in the following video. Of course, if you didn't buy our tripod turnstile gate, the process is similar, You can also refer to it. This part is roughly divided into five steps:

1.Determine the position of the tripod turnstile and place the equipment.
2.After positioning the hole, drill the hole and embed the expansion bolt;
3.Connect the power line and ground wire according to the turnstile wiring diagram.
4.Turn on the power and test the normal operation of the flap barrier turnstile.
5.Set the operation mode of the tripod turnstile.