How to Replace Engine Knock Sensor 1999-2006 Chevrolet Silverado 1500 4.3L V6

Описание: Shop for New Auto Parts at 1AAuto.com https://trq.video/c-180-aI

This video shows you how to install a new engine knock sensor from TRQ on your 1999-2006 Chevrolet Silverado 1500 (4.3L V6). A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.

Estimated installation time for a professional technician is approximately: 36 minutes

This repair was done on a 2004 Chevrolet Silverado 1500 Base 4.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obJo-1AXAA00013
• 8mm Wrench https://trq.video/okk-1AXAA00011
• 10mm Socket https://trq.video/obLN-1AXAA00017
• 13mm Socket https://trq.video/ocdb-1AXAA00015
• 16mm Socket https://trq.video/ocdb-1AXAA00015
• 8mm Socket https://trq.video/obLN-1AXAA00017
• Trim Tool Set https://trq.video/oaAQ-1AXXX00006
• T20 Socket
• Ratchet https://trq.video/ocep-1AXAA00016
• Socket Extensions https://trq.video/ocdb-1AXAA00015
• Torque Wrench https://trq.video/obgz-1AXAA00044
• Cloth Rags https://trq.video/oRe-1AXSS00035
• Dielectric Grease
• Gloves https://trq.video/obfs-1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Sandpaper
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 1999-2006 1st Gen:    • Chevy Silverado 1999-2006 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.