How to Adjust New Tech Machinery's FF150 and FF100 Profiles

Описание: Visit our service and support center: https://support.newtechmachinery.com/

How do you make FF150 and FF100 profile adjustments on a New Tech Machinery machine?

**********************************

The New Tech Machinery service team is often asked how to adjust uphill and downhill on FF150 and FF100 profiles. It's essential to know how to make these adjustments so your panels are running straight out on a job site.

Tim Laguardia, Assistant Service Manager, walks you through step-by-step on how to make these adjustments.

In this video:
0:00 - Intro
0:20 - How to adjust uphill and downhill
0:53 - Mark your panel
1:15 - Factory settings
1:36 - Turn on the machine and run a panel out
2:10 - Check uphill and downhill adjustments
2:29 - Outro

Interested in learning more about a machine? Contact us here: https://hubs.ly/H0f817Z0

**********************************

FOLLOW THE NEW TECH MACHINERY TEAM
►  / new-tech-machinery  
►  / ntmmazzella  

Visit Our Website: https://hubs.ly/H0f82Sn0
Subscribe To Our Blog: https://hubs.ly/H0f82T00

Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury.

New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.