How to Arduino mod a Guitar Hero guitar - Full step by step guide from scratch

Описание: ⚠️ FROM 2:56:05 WATCH THIS VIDEO    • How to Arduino mod a Guitar Hero guitar - ...   TO CONFIGURE WITH SANJAY'S SOFTWARE ⚠️

In this video I'm modding one of my GH3 wii guitar with arduino. I show the full process, step by step by doing the mod from the very beginning, with the guitar as you would get it from the factory, until it works on Clone Hero.

I show everything in between, measurements, soldering, putting the program in the card, and configuring Clone Hero.

This guide is very long because it is aimed at people who want to mod their guitar but don't know how to do it at all.

Here are the links I mention in the video :

Arduino IDE : https://www.arduino.cc/en/software
Arduino generic wiitar sketch by PixelGH : https://drive.google.com/file/d/1H_Gk...
Joystick library by MHeroinimus : https://github.com/MHeironimus/Arduin...
Clone Hero's Website : https://clonehero.net/

Update regarding the whammy not working in Clone Hero : I had to use the "calibrate" button to calibrate it. I also had to check the "invert" option. After that it worked fine.

Timeline
0:00 Introduction
1:54 What you need for the mod
7:31 Overview of the guitar
14:06 Measurements
33:10 Preparing the wires before soldering
1:03:14 Soldering the wires
2:35:43 Soldering the Arduino board
2:44:52 Plugging the wires in the board
2:56:05 Software part of the mod and testing
3:03:20 Clone Hero configuration