Print head maintenance (don't forget to move the print head back to capping station)
Автор: Eric Kwan
Загружено: 2021-01-11
Просмотров: 1123
Описание:
Don't forget to move the print head back to capping station after you do all these,
I forgot to mention that in the video, sorry,
Here's some detailed steps of the video in case you cannot understand my English:
If you can print every day that is the best way to keep it in good condition,
If you can not, run a cleaning every 2-3 days and check the print head status,
If you go for vacation for 1 week then follow the steps below,
Step 1: clean the cap top.
Step 2: put pure water (cleaning solution) to the cap top, 1/3 full will be ok, just to keep the print head moist, not soak it.
Step 3: pinch the tube under the cap top to prevent the water/solution drain to the waste ink bottle.
Step 4: pinch the ink tube below the bulk ink bottle.
Step 5: power off the machine, better put some Mothballs on both side of the machine, to prevent rat bit the wires.
Please note that water based ink, and solvent ink use different liquid, don't use it wrong, check with your seller if you are not sure.
You can cover the machine to prevent dust too.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
